Top » Catalog » Programmers and acessories » Socket converters » Converters » DIL/BGA » 70-0245/0242

€395.00 + VAT

BGA-0245/0242
[70-0245/0242]

BGA-0245/0242

special converter, assigned for memories in BGA package, for example S29AL016MxxBxx01 in BGA48
top board: BGA-Top-2 ZIF-CS (order no. 70-0242)
bottom board: BGA-Bottom-1 (order no. 70-0245)
ZIF socket accepts many variations of BGA packages, that differ in ball diameter, ball width and package thickness.
The picture at Accepted package(s) section shows the range of all dimensions of BGA packages, which are accepted by this BGA-Top board.
operation life of ZIF socket - 500.000 actuations
order no.: 70-0245/0242

socket: ZIF BGA48 (accept package up to 48 balls), ClamShell type
bottom: 2 rows, 2x 24 pins, square, 0.6x0.6mm, rows spacing 600mil

Converter manual

Insert converter to the programmer ZIF socket according to the picture placed near of it. If you have some doubts about orientation of this converter in programmer ZIF socket, it is valid general rule, the orientation of the text of title is the same as the text on the top of the programmer.
Open the converter ClamShell ZIF socket. Insert the device into it (place device on contacts). The right position of the programmed device in converter ZIF socket is show on the picture in control program PG4UW (Device info for selected device).
Visually check position of device in converter ClamShell ZIF socket. If everything looks OK, close it and now, device is ready for programming.
Be careful, because the incorrect insertion of converter to the programmer ZIF socket or device to the converter ClamShell ZIF socket can damage the programmed device.
To take out the device, open converter ClamShell ZIF socket and remove device from it.
When you finish work with converter, remove it from the programmer ZIF socket.
Do not directly touch the pins of the converter and converter ZIF socket, because dirt may cause errors during programming of device.
For handling with the device we recommended to use a vacuum pick up tool.
The picture show, how to put together the BGA-Top-x ZIF-CS and BGA-Bottom-x boards to have complete BGA converter

Reviews

Categories

Band Saw Blades
Butane soldering iron->
carpentry tools->
Chips Extractor
Componentes de elétronica->
Contact cleaner brush
Crimping Tools
Drilling-milling machine->
Drills->
Elecronic pliers->
Electronic Screwdrivers->
ESD Tools->
Inspection mirror
Insulation Resistance Tester
Lathes->
Magnifying->
Mesure tools
Micromot tools->
Programmers and acessories->
  GANG programmers
  Socket converters->
    Converters->
      DIL/BGA
      DIL/LQFP
      DIL/MLF
      DIL/MQFP
      DIL/PLCC
      DIL/PQFP
      DIL/PSOP
      DIL/QFN
      DIL/QFP
      DIL/QSOP
      DIL/SDIP
      DIL/SOIC
      DIL/SOT
      DIL/SSOP
      DIL/TQFP
      DIL/TSOP
      DIL/TSSOP
      DIL/VQFP
    submodule
  Universal programmers
Safety insulated screwdrivers->
Safety Isulated Pliers->
Service case
Service Case->
Solder and Flux->
Soldering Iron and station
Sprays->
Torque Screwdriver
Tweezers->
Warding files

Manufacturers

Information

Shipping & Returns
Privacy Notice
Conditions of Use

Shopping Cart

1 x	IT 200 - Indirect dividing attachment
2 x	Warding files set, 6pcs
1 x	Bench Circular Saw KS 230
2 x	Side cutters 170mm
3 x	PRECISION WIRE STRIPPER ESD-PLUS
1 x	precision machine vices FMS150
1 x	Cylindrical cutters
3 x	Engraving tool GG
1 x	Safety insulated screwdrivers 14-608 VDE
2 x	Stainless steel wheels
2 x	Set of precision cutters
3 x	Flat nose pliers 185mm
1 x	MICROMOT 50/EF
1 x	MICRO Miller MF 70
1 x	MICRO shaper MP 400
2 x	EUROline snipe nose pliers
2 x	Broca de alta duração de 1.5mm
2 x	PROTECTION 200ml
1 x	ANTISTATIC 200ml
1 x	Cylinder shaped milling cutters
2 x	Brass contact cleaner brush
3 x	MICRO-screwdrivers
1 x	Cups brushes
2 x	Stainless steel brushes
1 x	EUROline top cutter
3 x	Screwdriver 3.0
3 x	Safety Insulated Phillips Screwdriver 14-632VDE
1 x	ESD-handling set
3 x	EUROline mini side cutter
1 x	MICROMOT glue gun HKP 220
2 x	MICROFLAM gas soldering set MGS
3 x	Compact workshop vacuum cleaner CW-matic
2 x	Floor cover ESD
1 x	ESD Tweezers 5-191
3 x	Disc cutters
4 x	Tungsten carbide cutter 1.0mm
1 x	Scroll saw DS 230/E
1 x	BeeHive204
1 x	Mini side cutters EUROline-Conductive
1 x	DUSTER-BR 200ml
2 x	MICRO Screwdriver MIS 1. Complete with 16 inserts.
1 x	Super jig saw STS/E
1 x	MICRO woodturning lathe DB 250
2 x	Steel wheels
1 x	Snipe nose pliers 45º EUROline-Conductive
3 x	EUROline mini side cutter
1 x	Side cutters 160mm
1 x	Snipe nose pliers 45º EUROline-Conductive
1 x	Screwdriver 3.0
2 x	MICRO Heat gun MH 550
2 x	Router base OFV
2 x	Inspector mirror
3 x	Solid carbide stylus for engraving
1 x	FREEZER-TOP 200ml
3 x	TOP-PIN 200ml
3 x	Round nose pliers 185mm
1 x	Surface planer AH 80
1 x	Snipe nose pliers 45º EUROline-Conductive
2 x	Combination pliers 185mm
1 x	Bench drill press TBH
1 x	Cross-recess Screwdrivers 0
1 x	Screwdriver 4.0
1 x	Cut off/mitre saw KGS 80
2 x	DEGRESER 200ml
1 x	Telephone pliers bent 205mm
1 x	MICRO Band Saw MBS 240/E
1 x	PRINTER 200ml
2 x	Hand magnifier with LED light 3X
1 x	Wolfram vanadium steel milling bits
1 x	Tungsten carbide cutter 3.0mm
2 x	Ball shaped milling cutters
1 x	Precision Vice FMZ
1 x	Tungsten carbide cutter 2.0mm
1 x	Step clamps made of steel
2 x	Lever Dial Indicator
1 x	TORQUE-SCREWDRIVER 1.5 - 4.0 Nm
2 x	Precision caliper square
1 x	TORX-screwdrivers T4
1 x	Flat nose pliers 165mm
4 x	Antiallergical Tweezers 5-125-1
1 x	SCMT060204
1 x	Screwdriver 2.0
1 x	Screwdriver 1.2
1 x	Angle cutter 45 °
1 x	Inpection mirror 1-978
1 x	Half round cutter 13mm
3 x	Telephon pliers straight 200mm
1 x	Safety Insulated Pozidriv Screwdriver 14-643VDE
2 x	Screwdriver 2.5
3 x	Broca de alta duração de 0.5mm
2 x	Wire strippers 160mm
1 x	Super-fine sanding discs grain 000
1 x	Side cutters 160mm
1 x	Antiallergical Tweezers 5-107-1
1 x	Tweezer teflon-coated 5-107-9
1 x	Combination pliers 160mm
1 x	SCLCR1010E06
2 x	High quality corundum grinding bits
2 x	Telephon pliers bent 160mm
2 x	Milling cutter set (6 - 10mm)
1 x	TORX-screwdrivers T5
1 x	Safety insulated screwdrivers 14-602 VDE
2 x	Telephon pliers bent 200mm
2 x	Titan Tweezers 5-031
1 x	SPRAYFLON 200ml
1 x	Socket Wrenches 3.2
1 x	10-piece wood router cutter set
1 x	Boring Bar for CCMT 16mm
1 x	Ceramic tweezers 5-081
2 x	Broca de alta duração de 2.4mm
2 x	Socket Wrenches 2.5
1 x	Side cutters 160mm
1 x	Steel brushes
1 x	Earth wire with dummy Schunko-plug
1 x	Flat nose pliers 160mm
1 x	TORX-screwdrivers T15
3 x	Broca de alta duração de 0.3mm
2 x	EUROline-Conductive set of pliers
2 x	Component tweezers 5-006
1 x	TORX-screwdrivers T6
2 x	Socket Wrenches 4.5
1 x	TORX-screwdrivers T20
2 x	High quality corundum grinding bits
2 x	Ceramic-tipped tweezers and ESD 5-096
1 x	MULTI 200ml
2 x	Socket Wrenches 2.0
1 x	Cross-recess Screwdrivers 2
2 x	Combi cutter 6.5/2.5mm
1 x	Glass fibre contact cleaner brush
1 x	VIDEOCLEAN 200ml
3 x	Tweezer teflon-coated 5-117-9
2 x	Cross-recess Screwdrivers 1
1 x	Antiallergical Tweezers 5-117-1
3 x	Wrench Keys 2.0
1 x	V-slot cutter 6.5mm
2 x	Self-adhesive white corundum sanding discs for TG 125/E
1 x	PROLUB 200ml
1 x	Safety insulated screwdrivers 14-601 VDE
1 x	Telephon pliers straight 160mm
1 x	Diamond-coated cutting and roughing disc
2 x	Socket Wrenches 3.0
2 x	Cross-recess Screwdrivers 1
1 x	EUROline round nose pliers
2 x	SPRAYOIL 200ml
1 x	Safety Insulated Pozidriv Screwdriver 14-641VDE
1 x	SMD Tweezers 5-054
4 x	Broca de alta duração de 2.3mm
1 x	EUROline end cutter
3 x	End side cutters EUROline-Conductive
1 x	TORX-screwdrivers T7
1 x	Cross-recess Screwdrivers 2
3 x	Component tweezers 5-008
1 x	Broca de alta duração de 1.1mm
2 x	Handy 1515
2 x	Cotton polishers
1 x	Boring Bar for DCMT 10mm
1 x	Component tweezers 5-013
2 x	Socket Wrenches 1.5
1 x	Round nose pliers 165mm
1 x	Parting tool 10mm
1 x	Broca de alta duração de 2.0mm
3 x	Screwdriver 5.5
1 x	Plastic magnifying glass
2 x	SMD Tweezers 5-058
1 x	Safety Insulated Phillips Screwdriver 14-634VDE
1 x	Combination pliers 185mm
1 x	Boring Bar for CCMT 8mm
1 x	ESD Brushe
1 x	Side cutters 180mm
1 x	Titan Tweezers 5-036
1 x	Cross-recess Screwdrivers Pozidriv 2
3 x	Broca de alta duração de 0.4mm
3 x	FLUX DISPENSING PEN, LEAD FREE
1 x	Combination pliers 190mm
2 x	SMD Tweezers 5-062
2 x	Telephone pliers stright 165mm
1 x	FLUX-OFF 400ml
1 x	Combination pliers 210mm
1 x	Stainless steel cups
1 x	Machine Vice MS 4
3 x	Broca de alta duração de 2.5mm
1 x	6-piece wrench key set ESD
1 x	Diamond Cutting Discs
2 x	Wrench Keys 0.7
2 x	Broca de alta duração de 1.0mm
1 x	TORQUE-SCREWDRIVER 0.5 - 1.5 Nm
1 x	Flexible polishing pad set
1 x	Wrench Keys 2.5
1 x	Antiallergical Tweezers 5-121-1
2 x	Ball-shaped diamond coated 3.2mm
1 x	Titan Tweezers 5-035
1 x	Diamond Grinding Bits 1mm
1 x	6-piece screwdriver and cross-recess set ESD
1 x	Broca de alta duração de 1.2mm
1 x	Sanding Discs
2 x	TORX-screwdrivers T10
1 x	Broca de alta duração de 0.7mm
1 x	Sanding Drums
2 x	TORX-screwdrivers T10
2 x	VASELINE 200ml
1 x	Telephone pliers straight 205mm
1 x	6-piece socket wrenches ESD
1 x	Ball-shaped diamond coated 2.2mm
1 x	Flap Wheels
1 x	Flap Wheels
2 x	Polishing paste
1 x	Felt polishers
2 x	Cotton polishers
1 x	6-piece screwdriver set ESD
2 x	Belt sander BBS/S
2 x	broca de alta duração de 0,6mm
3 x	Broca de alta duração de 2.1mm
2 x	Tweezer teflon-coated 5-021-9
2 x	Broca de alta duração de 1.4mm
1 x	TORX-screwdrivers T10
2 x	Diamond Grinding Bits 5mm
1 x	Safety Insulated Pozidriv Screwdriver 14-642VDE
2 x	Broca de alta duração de 2.2mm
2 x	POLISHER 200ml
1 x	TORX-screwdrivers T8
1 x	Sanding bands 14x13mm
1 x	Diamond Cutting Discs
1 x	Wire strippers 160mm
2 x	Diamond Cutting Discs
1 x	High quality corundum grinding bits
2 x	Socket Wrenches 4.0
2 x	Broca de alta duração de 2.8mm
1 x	Insert CCGT060202-AK
1 x	End side cutters 45º EUROline-Conductive
1 x	Broca de alta duração de 1.3mm
1 x	High quality corundum grinding bits
1 x	Broca de alta duração de 0.9mm
1 x	Flame shaped milling cutters
1 x	broca de alta duração de 0,2mm
2 x	Diamond Grinding Bits 1,8mm
1 x	Wrench Keys 1.5
1 x	Diamond Grinding Bits 1,8mm
1 x	Sanding bands 14x13mm
1 x	Sanding Drums
1 x	6-piece TORX-screwdriver-set ESD
1 x	Side cutters EUROline-Conductive
1 x	Tungsten carbide drills Ø1,5mm
1 x	SMD Tweezers 5-052
1 x	Grinding mop cylinder grit 240
1 x	Coarse-toothed (18 TPI per 25mm)
2 x	Component tweezers 5-009
1 x	Titan Tweezers 5-037
2 x	SMD Tweezers 5-071
2 x	Felt polishers
1 x	Fibre-Cut Discs
1 x	Replacement belts for BSL 220/E
1 x	SMD Tweezers 5-075
1 x	SMD Tweezers 5-053
1 x	PLCC Extractor
2 x	Replacement belts for BSL 220/E
1 x	Chuck for TBM 220
1 x	Fibre-Cut Discs
1 x	Grinding mop cylinder grit 120
1 x	Edge cutter with pin 6.4mm
1 x	Safety insulated screwdrivers 14-603 VDE
1 x	Flexible silicon discs
1 x	Round nose pliers 45º EUROline-Conductive
1 x	Cotton polishers
1 x	Steel tape measure
1 x	Self-adhesive white corundum sanding discs for TG 125/E
1 x	Ball-shaped diamond coated 1.2mm
1 x	Metal Cutting Blades
1 x	Coarse-toothed blades (No. 5: 36 teeth per 25mm)
1 x	Silicon-Carbide.
1 x	Fibre-Cut Discs
1 x	HSS drill bits 0.8mm
1 x	Replacement glue sticks for HKP 220
1 x	OPTI BF20 VARIO
1 x	DCGT 070202F-AL
1 x	SMD Tweezers 5-051

€15,025.64