6pcs Double Open End wrench set, Oficina-digital.com

Top » Catalog » Electronic Screwdrivers » Special tools » 6-750

Categories

Band Saw Blades
Butane soldering iron->
carpentry tools->
Chips Extractor
Componentes de elétronica->
Contact cleaner brush
Crimping Tools
Drilling-milling machine->
Drills->
Elecronic pliers->
Electronic Screwdrivers->
  Electronics screwdrivers->
  Screwdrivers set
  Special tools
ESD Tools->
Inspection mirror
Insulation Resistance Tester
Lathes->
Magnifying->
Mesure tools
Micromot tools->
Programmers and acessories->
Safety insulated screwdrivers->
Safety Isulated Pliers->
Service Case->
Service case
Solder and Flux->
Soldering Iron and station
Sprays->
Torque Screwdriver
Tweezers->
Warding files

Manufacturers

Information

Shipping & Returns
Privacy Notice
Conditions of Use

Shopping Cart

1 x	sanding belts for BBS/s Grit 80
1 x	Slot cutter 6.5mm
2 x	Coarse-toothed blades (No. 5: 36 teeth per 25mm)
1 x	Grinding mop cylinder grit 120
1 x	sandpaper for PS 13 Grit 240
1 x	Fixed Steady
1 x	MICRO shaper MP 400
1 x	sanding belts for BBS/s Grit 150
1 x	Rebating cutter 6.4mm
1 x	Crimping plier for BNC
1 x	Saw blade made of high-alloy special steel
1 x	sanding belts for BBS/s Grit 240
2 x	Fluted filter for CW-matic
1 x	Core box bit 3.2mm
1 x	MICROMOT 50
2 x	Coarse-toothed blades (No. 3: 41 teeth per 25mm)
1 x	Slot cutter 5.0mm
1 x	Long neck angle milling/drilling unit LWB 220/E
1 x	Sanding pads for OZI 220/E grit 150
1 x	HSS immersion saw blades for OZI
1 x	Drill chuck with sliding sleeve for the tailstock
1 x	HSS immersion saw blades for OZI
1 x	Table Saw FET
1 x	Combi cutter 6.5/2.5mm
1 x	Gear Chuck
1 x	Jig saw blades made of HSS
1 x	CRIMPING PLIERS FOR CONNECTOR TYPES HT-210C
1 x	MICRO cutter MIC
2 x	Grinding mop cylinder grit 240
1 x	MICRO Miller FF 500
1 x	Coarse-toothed blades (No. 1: 50 teeth per 25mm)
1 x	MICRO Miller FF 230
1 x	MICRO woodturning lathe DB 250
1 x	PLCC Puller
1 x	MICRO Band Saw MBS 240/E
2 x	Grinding mop cylinder grit 80
1 x	Long neck straight drill/grinder LB/E
1 x	Step clamps made of steel
1 x	Diamond-coated cutting disc for MIC
2 x	Grinding mop cylinder grit 120
1 x	Solid carbide saw blade
2 x	Coarse-toothed blades (No. 5: 17 teeth per 25mm)
1 x	Universal polishing paste
1 x	Cut off/mitre saw KGS 80
1 x	Coarse-toothed (18 TPI per 25mm)
1 x	Blade guides separately
1 x	Dial gauge
1 x	magnetic base 80kg
1 x	Cutting disc, with reinforcement
1 x	Blade for Steel and brass
2 x	Super-fine sanding discs grain 000
1 x	Tungsten Carbide Tipped (TCT)
1 x	Diamond Coated
1 x	TORQUE-SCREWDRIVER 0.5 - 1.5 Nm
1 x	Corundum fan sander for LWS
1 x	Backing disc for LWS
1 x	Extra narrow bandsaw blade (3.5mm) for tight radii
1 x	Precision caliper 500mm
1 x	Professional set for finish grinding and polishing
1 x	Super-fine sanding discs grain 2000
1 x	Hot wire cutter THERMOCUT 230/E
1 x	Glass fibre contact cleaner brush
1 x	Blade holders for DS 460
1 x	Chuck for TBM 220
1 x	Fine dust paper filter for CW-matic
1 x	Self-adhesive white corundum sanding discs for TG 125/E
1 x	Magnetic base
1 x	Brass contact cleaner brush
1 x	Coarse-toothed blades (No. 3: 34 teeth per 25mm)
1 x	Footswitch FS
1 x	replacement glass fibre for 2-166 Ø 4mm (PU 10)
1 x	Steel tape measure
1 x	Coarse-toothed blades (No. 9: 14 teeth per 25mm)
1 x	Three piece thread cutting set
1 x	TORQUE-SCREWDRIVER 1.5 - 4.0 Nm
1 x	Bandsaw blade of bimetal for MBS 240/E
1 x	Super-Cut
1 x	Tungstein carbide rasp - and cutting disc
1 x	HSS 1,065 x 6 x 0.6mm Dentado variável 10-14 TPI
1 x	Diamond blade for MBS 240/E
1 x	Microfibre cloth
1 x	Band knife of hardened spring band steel (without teeth)
1 x	Cutting tools of high quality cobalt HSS steel, ground
1 x	Professional polishing sponge
1 x	Coarse-toothed (10 TPI per 25mm)
1 x	MICROMOT Mains Adapter NG 2/S
1 x	Precision Vice FMS 75
1 x	MICROMOT drill stand MB 200

€6,075.29