€6,950.00 + VAT

BeeHive208S
[60-0054]

BeeHive208S

BeeHive208S

Extremely fast universal 8x 48-pin-drive Stand-Alone concurrent Production Programmer ( multiprogramming system )

 
Elnec fully understand needs of customers programming high volumes for which cost of adapters is one of most important component of costs. Therefore Elnec policy is to offer:

Short description:

  • supported devices from manufacturers by 2.76 version of SW (27. Jan. 2011)
  • eight independent universal programming modules (BeeProg2 based) in one unit
  • extremely fast programming, one of the fastest programmers in this category. Programs 64-Mbit NOR Flash memory in less than 9 seconds and 1Gbit NAND Flash in less than 70 sec.
  • powerful independent pin-driver circuit for each and every pin of the programmer
  • in-circuit programming capability through ISP connector
  • graphics control unit with touch screen
  • very low voltage support for the latest Flash memory chips
  • ESD protection on each pin of the sockets
  • no adapter required for any DIL devices
  • Windows XP Embedded driven control PC internal to the programmer
  • unique quick reaction to customer\'s needs - software update can be ready within a day from request by OnDemand software
  • made in Slovakia
  • warranty - 3 years

Please see the full information in http://www.elnec.com/products/production-programmers/beehive208s/

 


Reviews
Manufacturers
1 x Corundum grinding disc for LWS
1 x Angle cutter 45 °
1 x Sanding fleece for LWS
2 x Chuck for TBM 220
1 x Rounding over cutter 6.4mm
1 x Router base OFV
1 x Spiral blade. 125mm long with plain ends (without pins).
2 x Diamond-coated cutting and roughing disc
1 x Digital caliper gauge 300 mm
1 x Solid carbide saw blade
1 x Rasp plate with metal burrs made from wolfram carbide for LWS
1 x Micro Compound Table KT 70
1 x MICRO woodturning lathe DB 250
1 x Slot cutter 6.5mm
1 x Slot cutter 5.0mm
1 x Warding files set, 6pcs
1 x TORQUE-SCREWDRIVER 0.5 - 1.5 Nm
1 x Coarse-toothed (10 TPI per 25mm)
1 x Backing disc for LWS
1 x Lever Dial Indicator
1 x Coarse-toothed blades (No. 9: 14 teeth per 25mm)
1 x 10-piece wood router cutter set
1 x Corundum grinding disc for LWS
1 x replacement glass fibre for 2-166 Ø 4mm (PU 10)
1 x magnetic base 80kg
1 x Motor-driven carving device MSG
1 x Corundum sanding discs for LWS
1 x MICRO cutter MIC
1 x Three-jaw steel drill chuck
2 x Centre Turning Attachment
1 x MICRO Band Saw MBS 240/E
1 x Corundum fan sander for LWS
1 x Microfibre polishing wheel, 15-ply (100mm)
1 x Coarse-toothed (18 TPI per 25mm)
1 x Precision caliper 500mm
1 x Corundum sanding discs for LWS
1 x Aluminium Die-Cast
1 x Slot cutter 3.2mm
1 x Steel tape measure
1 x Coarse-toothed blades (No. 5: 17 teeth per 25mm)
1 x Flexishaft MICROMOT 110/BF
1 x Sanding fleece for LWS
1 x MICROMOT Mains Adapter NG 2/E
1 x Combi cutter 6.5/2.5mm
1 x Spare cutting wire
1 x Glass fibre contact cleaner brush
1 x Table Saw FET
1 x Super jig saw STS/E
1 x Thicknesser DH 40
1 x Surface planer AH 80
1 x Protective device for hand-operated MICROMOT
1 x 14-piece parallel supports set
1 x Dial gauge
1 x Corundum fan sander for LWS
1 x Hot wire cutter THERMOCUT 230/E
1 x Delta sander OZI/E
1 x MICROMOT 50/E
1 x Professional set for finish grinding and polishing
1 x Angle polisher WP/E
1 x Inpection mirror 1-978
1 x Multipurpose Vices Primus100
1 x Self-adhesive white corundum sanding discs for TG 125/E
1 x Mill/Drill System BFW 40/E
1 x Drill chuck with sliding sleeve for the tailstock
1 x Replacement cutting wire for the THERMOCUT 12/E
1 x Insulation Resistance Tester MG500
1 x MICRO Miller FF 230
1 x MICROMOT 230/E
1 x Replacement belts for BSL 220/E
1 x Hot wire cutter THERMOCUT 12/E
1 x Felt cloth polishing disc (100 x 15mm)
1 x Silicon-Carbide.
1 x Long neck angle grinder LHW
1 x HSS cutting blade for OZI
1 x Precision steel vice PM 40
1 x MICROFLAM gas soldering set MGS
1 x Multipurpose Vices Primus 75
1 x Complete Engraving Kit with trial glass
1 x Bench drill machine TBM 220
1 x Hot wire cutter THERMOCUT 650
1 x Super safety and specialty bit set, 75-piece
1 x Polishing machine PM 100
1 x Sanding pads for OZI 220/E grit 80
1 x Self-adhesive white corundum sanding discs for TG 250/E
1 x Belt sander BS/E
1 x Cylinder sander WAS/E
1 x Bench drill press TBH
1 x Sanding pads for OZI 220/E grit 150
1 x Lambswool polishing disc
1 x MICROMOT 50/EF
1 x Polishing felt, medium hard
1 x sanding belts for BBS/s Grit 150
1 x Super-fine sanding discs grain 2000
1 x Independent four jaw chuck for the DB 250
1 x Grinding and Polishing Machine SP/E
1 x Diamond cutting blade for OZI
1 x Machine Vice MS 4
1 x Pensander PS 13
1 x Precision Vice FMS 75
1 x Belt sander BBS/S
1 x Disc Sander TG 250/E
1 x MICROFLAME burner MFB/E
1 x Super-fine sanding discs grain 400
1 x Professional Drill/Grinder IBS/E
1 x 
1 x MICROMOT Mains Adapter NG 5/E
1 x Professional polishing sponge
1 x Self-adhesive silicone carbide sanding discs for TSG 250/E
1 x MICRO Screwdriver MIS 1. Complete with 16 inserts.
1 x Jig saw blades made of HSS
1 x Band knife of hardened spring band steel (without teeth)
1 x Blade guides separately
1 x HSS 1,065 x 6 x 0.6mm Dentado variável 10-14 TPI
2 x Grinding mop cylinder grit 120
1 x Tungstein carbide rasp - and cutting disc
€7,737.19
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
We Accept
Manufacturer Info
Elnec
Elnec Homepage
Other products
Languages
Portugues English
Share Product
Share on Facebook