€4.75 + VAT

FREEZER-BR 200ml
[1461412]

FREEZER-BR 200ml

Quickly Tracks Thermal Intermittents, Cools Down to -50° C.

  • FREEZER-BR is CFC-free.
  • It ensures reliable cooling down to -50°C.
  • It quickly locates thermal intermittent components due to heat induces failure.
  • The product is chemically pure, flammable and evaporates immediately without leaving residue.

Application:

  • Low temperature testing of electronic systems and heat-sensitive components such as ICs, transistors, diodes, resistors, capacitors and other defective components.
  • Also suitable for heat sink protection of electronic components during soldering or desoldering.
  • Low temperature testing of electromechanical systems and electronic circuits.
  • Location of hairline cracks in printed circuit boards.

Technical Data:

 

Density: 0.54 g / cm³
Evaporation: complete
Temperature obtained:  -50° C
Flash point: flammable
ODP: 0.00

Reviews

Customers who bought this product also purchased
DUSTER-BR 200ml
DUSTER-BR 200ml
DEGRESER 200ml
DEGRESER 200ml
Glass fibre contact cleaner brush
Glass fibre contact cleaner brush
Manufacturers
1 x Super safety and specialty bit set, 75-piece
2 x Super-fine sanding discs grain 000
1 x Sanding fleece for LWS
1 x Polishing machine PM 100
1 x MICROMOT Mains Adapter NG 2/S
1 x Super-fine sanding discs grain 400
1 x Three jaw chuck for the lathe DB 250
1 x Dial gauge
1 x Cylinder sander WAS/E
1 x Coarse-toothed (10 TPI per 25mm)
1 x Replacement cutting disc for MICRO cutter MIC
1 x Microfibre cloth
1 x Four Jaw Chuck
1 x Gear Chuck
1 x Slot cutter 3.2mm
1 x Coarse-toothed blades (No. 5: 36 teeth per 25mm)
1 x Universal and oil siphoning pump AP 12
1 x Insulation Resistance Tester MG500
1 x Edge cutter with pin 6.4mm
2 x Grinding mop cylinder grit 120
1 x Diamond-coated cutting disc for MIC
1 x Grinding and Polishing Machine SP/E
1 x Drill chuck with sliding sleeve for the tailstock
1 x Precision magnetic gauge stand
1 x Backing disc for LWS
2 x Grinding mop cylinder grit 120
1 x Lambswool polishing disc
1 x Coarse-toothed blades (No. 3: 34 teeth per 25mm)
1 x Jig saw blades made of HSS
1 x Inspector mirror
1 x Multipurpose Vices Primus 75
1 x Coarse-toothed (25 TPI per 25mm)
1 x Combi cutter 6.5/2.5mm
1 x Disc Sander TG 250/E
1 x Independent four jaw chuck for the DB 250
1 x Precision caliper square
1 x Coarse-toothed blades (No. 9: 14 teeth per 25mm)
1 x Screwdriver bit set. 49-piece.
1 x Insulation Resistance Tester MG125
1 x Disc Sander TG 125/E
1 x Steel tape measure
1 x Corundum grinding disc for LWS
2 x Tungsten Carbide Tipped (TCT)
2 x Grinding mop cylinder grit 240
1 x MICROMOT Mains Adapter NG 5/E
1 x Rasp plate with metal burrs made from wolfram carbide for LWS
1 x Coarse-toothed blades (No. 1: 50 teeth per 25mm)
1 x 
1 x Precision caliper 500mm
1 x Diamond-coated cutting and roughing disc
1 x Warding files set, 6pcs
2 x Machine Vice MS 4
1 x Collet Set for accurate use on round components
1 x Blade holders for DS 460
1 x Rounding over cutter 6.4mm
1 x Corundum bound cutting disc for LWS
1 x Sanding fleece for LWS
2 x Precision steel vice PM 40
1 x Multipurpose Vices Primus100
1 x Radius Cutting Attachment, complete with pointed tool
1 x Corundum sanding discs for LWS
1 x Spiral blade. 125mm long with plain ends (without pins).
1 x Grinding mop cylinder grit 80
1 x Cutting disc, with reinforcement
1 x Inpection mirror 1-978
1 x Tungstein carbide rasp - and cutting disc
1 x V-slot cutter 6.5mm
1 x Professional set for finish grinding and polishing
1 x Five piece HSS chisel set
1 x Slot cutter 5.0mm
1 x Lever Dial Indicator
1 x Coarse-toothed blades (No. 5: 17 teeth per 25mm)
1 x Angle cutter 45 °
1 x Polishing felt, medium hard
1 x Long neck angle milling/drilling unit LWB 220/E
1 x Tungsten tipped saw blade
1 x Sanding pads for OZI 220/E grit 80
1 x Lathe System PD 400
1 x MICROMOT 50/E
1 x Dividing attachment TA 230 for PF 250
1 x Multiform grindstone
1 x Sanding pads for OZI 220/E grit 240
1 x Chuck for TBM 220
1 x 14-piece parallel supports set
1 x MICROMOT steel collet set
1 x Long neck straight drill/grinder LB/E
1 x Replacement belts for BSL 220/E
1 x Super jig saw STS/E
1 x Cutting tools of high quality cobalt HSS steel, ground
1 x Hot wire cutter THERMOCUT 230/E
1 x Aluminium Die-Cast
1 x Hot wire cutter THERMOCUT 650
1 x MICRO Miller FF 500
1 x Surface planer AH 80
1 x Step clamps made of steel
1 x Three-jaw steel drill chuck
1 x TORQUE-SCREWDRIVER 0.5 - 1.5 Nm
1 x TORQUE-SCREWDRIVER 1.5 - 4.0 Nm
1 x Sanding pads for OZI 220/E grit 150
1 x MICROMOT extension cord. 300cm.
1 x Bench drill machine TBM 220
1 x 2-speed scroll saw DSH
1 x MICRO Band Saw MBS 240/E
1 x sanding belts for BBS/s Grit 80
1 x Polishing Set
1 x Precision lathe PD 250/E
1 x PLCC Puller
1 x Replacement carving blades for MSG
1 x Crosscut 'Super-Cut' blade
1 x Super-Cut
1 x Flexishaft MICROMOT 110/BF
1 x Precision Drill/Grinder FBS 240/E
1 x Motor-driven carving device MSG
1 x Replacement belts for BSL 220/E
€10,797.63
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
We Accept
Manufacturer Info
CRAMOLIN
CRAMOLIN Homepage
Other products
Languages
Portugues English
Share Product
Share on Facebook