Top » Catalog » Torque Screwdriver » 4-562

€189.50 + VAT

TORQUE-SCREWDRIVER 1.5 - 4.0 Nm
[4-562]

TORQUE-SCREWDRIVER EUROLINE-POWER

Ergonomical formed two-coloured-components handle

Handle: impact-resistant, two-coloured plastic, with slip off protection and practical hanging up hole.

clear legible micrometer scale for a precise and perfect setting, torque adjusting without setting gauge

Torque mechanism: wear-resistant mechanism from hardened special steel, audible and touchable release signal

Lock mechanism: secure locking device by lock mechanism ( lock point = vernier line )

Actuating mechanism: system with changeable blades, left tightening with more or less unlimited removing, right tightening with adjusted torque.

Torque screwdrivers can be recalibrated and are in accordance with EN ISO 6789:2003

Torque-Screwdriver

Measure range Nm: 1.5 - 4.0
Scale Nm: 0.50
Fine scale mm: 0.10
Drive inner hexagon mm: 4
Length mm: 153
Weight: 137 g

Reviews

Categories

Band Saw Blades
Butane soldering iron->
carpentry tools->
Chips Extractor
Componentes de elétronica->
Contact cleaner brush
Crimping Tools
Drilling-milling machine->
Drills->
Elecronic pliers->
Electronic Screwdrivers->
ESD Tools->
Inspection mirror
Insulation Resistance Tester
Lathes->
Magnifying->
Mesure tools
Micromot tools->
Programmers and acessories->
Safety insulated screwdrivers->
Safety Isulated Pliers->
Service case
Service Case->
Solder and Flux->
Soldering Iron and station
Sprays->
Torque Screwdriver
Tweezers->
Warding files

Manufacturers

Information

Shipping & Returns
Privacy Notice
Conditions of Use

Shopping Cart

1 x	sanding belts for BBS/s Grit 240
1 x	Glass fibre contact cleaner brush
1 x	Inspector mirror
1 x	6-piece socket wrenches ESD
1 x	Cylinder sander WAS/E
1 x	HSS boring tool set, 6 pieces
1 x	Ball shaped milling cutters
1 x	replacement glass fibre for 2-166 Ø 4mm (PU 10)
1 x	surface planing and thicknessing ADH 200
1 x	Corundum fan sander for LWS
1 x	Earth wire
2 x	Steel tape measure
1 x	DEGRESER 200ml
1 x	Tungsten Carbide Tipped (TCT)
1 x	Lambswool polishing disc
1 x	Coarse-toothed (10 TPI per 25mm)
1 x	Universal and oil siphoning pump AP 12
1 x	Precision drill grinder FBS 12/EF
2 x	Cutting disc, with reinforcement
1 x	Sanding Drums
1 x	Angle cutter 45 °
1 x	Belt sander BS/E
1 x	Insulation Resistance Tester MG500
1 x	Sanding Drums
1 x	Sanding Drums
1 x	Coarse-toothed (18 TPI per 25mm)
1 x	FLUX-OFF 400ml
1 x	Contact bracelet with spiral cord
1 x	Inpection mirror 1-978
1 x	Jig saw blades made of HSS
1 x	lathe tools 10mm
1 x	Combination pliers 190mm
1 x	Earth wire with dummy Schunko-plug
1 x	Grinding and Polishing Machine SP/E
1 x	ESD-handling ser 9-361
1 x	Universal polishing paste
1 x	Angle polisher WP/E
1 x	Chuck for TBM 220
1 x	Hot wire cutter THERMOCUT 12/E
1 x	Glass fibre contact cleaner brush
1 x	Precision caliper 500mm
1 x	Flexible polishing pad set
1 x	Corundum sanding discs for LWS
1 x	Tool holder type H for SWH 1-A
1 x	surface planing and thicknessing ADH 250
1 x	Disc Sander TG 250/E
1 x	Aluminium Die-Cast
1 x	Pensander PS 13
1 x	Replacement cutting disc for MICRO cutter MIC
2 x	MICRO Miller FF 500
1 x	Long neck angle milling/drilling unit LWB 220/E
1 x	Ball-shaped diamond coated 2.2mm
1 x	Cutting tools of high quality cobalt HSS steel, ground
1 x	Combination pliers 185mm
1 x	Sanding bands 14x13mm
1 x	TIP SPT-2
2 x	Long neck straight drill/grinder LB/E
1 x	Safety Insulated Phillips Screwdriver 14-633VDE
1 x	Bandsaw blade of bimetal for MBS 240/E
1 x	Flat nose pliers 185mm
1 x	Fibre-Cut Discs
2 x	Belt sander BBS/S
1 x
1 x	MICROMOT 50/EF
1 x	Multipurpose Vices Primus100
1 x	Broca de alta duração de 2.8mm
1 x	Combination pliers 170mm
1 x	Telephone pliers bent 165mm
1 x	Broca de alta duração de 2.9mm
1 x	Sanding bands 14x13mm
1 x	HSS immersion saw blades for OZI
1 x	BIT-SET
1 x	Milling cutter set (6 - 10mm)
1 x	Magnetic base
1 x	Mill/Drill System BFW 40/E
1 x	Dial gauge
1 x	Bench drill machine TBM 220
1 x	Bench Circular Saw KS 230
1 x	Telephone pliers stright 205mm
1 x	Delta sander OZI/E
1 x	Fibre-Cut Discs
1 x	Broca de alta duração de 2.6mm
1 x	Sanding pads for OZI 220/E grit 80
1 x	Cylinder shaped milling cutters
1 x	Multipurpose Vices Primus 75
1 x	Handy 1515
1 x	Super-fine sanding discs grain 400
1 x	MICROMOT 50
1 x	Grinding mop cylinder grit 120
1 x	TORQUE-SCREWDRIVER 0.5 - 1.5 Nm
1 x	Coarse-toothed (25 TPI per 25mm)
1 x	sanding belts for BBS/s Grit 80
1 x	Follow rest for D250X550

€9,154.38