€6,950.00 + VAT

BeeHive208S
[60-0054]

BeeHive208S

BeeHive208S

Extremely fast universal 8x 48-pin-drive Stand-Alone concurrent Production Programmer ( multiprogramming system )

 
Elnec fully understand needs of customers programming high volumes for which cost of adapters is one of most important component of costs. Therefore Elnec policy is to offer:

Short description:

  • supported devices from manufacturers by 2.76 version of SW (27. Jan. 2011)
  • eight independent universal programming modules (BeeProg2 based) in one unit
  • extremely fast programming, one of the fastest programmers in this category. Programs 64-Mbit NOR Flash memory in less than 9 seconds and 1Gbit NAND Flash in less than 70 sec.
  • powerful independent pin-driver circuit for each and every pin of the programmer
  • in-circuit programming capability through ISP connector
  • graphics control unit with touch screen
  • very low voltage support for the latest Flash memory chips
  • ESD protection on each pin of the sockets
  • no adapter required for any DIL devices
  • Windows XP Embedded driven control PC internal to the programmer
  • unique quick reaction to customer\'s needs - software update can be ready within a day from request by OnDemand software
  • made in Slovakia
  • warranty - 3 years

Please see the full information in http://www.elnec.com/products/production-programmers/beehive208s/

 


Reviews
Manufacturers
2 x Aluminium Die-Cast
1 x Coarse-toothed blades (No. 5: 36 teeth per 25mm)
1 x Coarse-toothed blades (No. 3: 41 teeth per 25mm)
1 x BeeProg2
2 x EUROline round nose pliers
2 x EUROline mini side cutter
1 x Coarse-toothed blades (No. 9: 14 teeth per 25mm)
1 x Diamond Coated
1 x TIP SPT-10
1 x Flexishaft MICROMOT 110/BF
2 x Gear Chuck
1 x 10-piece wood router cutter set
1 x BGA-Bottom-101
1 x Super-fine sanding discs grain 000
1 x BGA-0245/0241
1 x Sanding fleece for LWS
2 x MICROMOT Mains Adapter NG 5/E
1 x Coarse-toothed blades (No. 1: 50 teeth per 25mm)
1 x BGA-Bottom-111
1 x Tool holder for rotary tools
1 x MICROMOT extension cord. 300cm.
1 x Corundum sanding discs for LWS
1 x Core box bit 3.2mm
1 x Professional set for finish grinding and polishing
1 x Corundum fan sander for LWS
1 x EUROline mini side cutter
2 x Fixed Steady
2 x Mill/Drill Unit BFB 2000.
1 x Replacement belts for BSL 220/E
2 x EUROline flat nose pliers
1 x Multiform grindstone
1 x Rebating cutter 6.4mm
1 x V-slot cutter 6.5mm
1 x Precision Vice FMS 75
1 x Universal holder UHZ
2 x EUROline side cutter pointed head
1 x Super-Cut
1 x BGA-Bottom-125
2 x EUROline mini side cutter
1 x EUROline set of pliers
1 x BGA-Bottom-10
1 x Cylinder sander WAS/E
2 x EUROline snipe nose pliers
1 x Centre Turning Attachment
1 x BGA-Bottom-106
1 x Tungsten Carbide Tipped (TCT)
1 x Chuck for TBM 220
1 x BGA-Bottom-108
1 x Corundum fan sander for LWS
1 x Solid carbide saw blade
1 x 
2 x EUROline side cutter rounded head
1 x Polishing Set
1 x Grinding mop cylinder grit 120
2 x sanding belts for BBS/s Grit 150
1 x BGA-Bottom-1
1 x Replacement carving blades for MSG
2 x Radius Cutting Attachment, complete with pointed tool
1 x Felt cloth polishing disc (100 x 15mm)
2 x Flexishaft MICROMOT 110/P
1 x Tungstein carbide rasp - and cutting disc
2 x MICROMOT Mains Adapter NG 2/E
1 x Slot cutter 3.2mm
2 x Crosscut 'Super-Cut' blade
1 x Treated muslin polishing wheel, stiff (100 x 15mm)
2 x Silicon-Carbide.
1 x BGA-0246/0244
2 x EUROline end cutter
1 x BeeHive204
1 x Step clamps made of steel
1 x Diamond blade
1 x Professional polishing sponge
1 x EUROline top cutter
1 x Three-jaw steel drill chuck
1 x EUROline mini side cutter
1 x Special Fused Alumina (Hardness N).
1 x Protective device for hand-operated MICROMOT
1 x BGA-0246/0243
1 x Multipurpose Vices Primus 75
1 x Precision Vice FMZ
1 x Coarse-toothed blades (No. 5: 17 teeth per 25mm)
1 x Replacement belts for BSL 220/E
1 x Grinding mop cylinder grit 240
1 x Screwdriver bit set. 49-piece.
1 x Microfibre polishing wheel, 15-ply (100mm)
1 x Backing disc for LWS
1 x Corundum grinding disc for LWS
1 x MICROMOT drill stand MB 200
1 x Four Jaw Chuck
1 x Replacement belts for BSL 220/E
1 x Dividing attachment TA 230 for PF 250
1 x MICROMOT steel collet set
1 x MICROMOT tool holder
1 x Micro Compound Table KT 70
1 x Saw blade made of high-alloy special steel
1 x Grinding mop cylinder grit 120
1 x BGA-Bottom-102
1 x MICROMOT Mains Adapter NG 2/S
1 x Lathe System PD 400
€11,389.58
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
We Accept
Manufacturer Info
Elnec
Elnec Homepage
Other products
Languages
Portugues English
Share Product
Share on Facebook