€7.30 + VAT

FREEZER-TOP 200ml
[1301412]

FREEZER-TOP 200ml

Quickly Tracks Thermal Intermittents, Cools Down to -50° C.

  • FREEZER-TOP is CFC-free.
  • It ensures reliable cooling down to -50° C.
  • It quickly locates thermal intermittent components due to heat induces failure.
  • The product is chemically pure, nonflammable and evaporates immediately without leaving residue.

Application:

  • Low temperature testing of electronic systems and heat-sensitive components such as ICs, transistors, diodes, resistors, capacitors and other defective components.
  • Also suitable for heat sink protection of electronic components during soldering or desoldering.
  • Low temperature testing of electromechanical systems and electronic circuits.
  • Location of hairline cracks in printed circuit boards.

Technical Data:

 

Density: 1.08 g / cm³
Evaporation: complete
Temperature obtained:  -50° C
Flash point: none
ODP: 0.00
Reviews

Customers who bought this product also purchased
BeeProg2
BeeProg2
Manufacturers
1 x Polishing machine PM 100
2 x MICRO-screwdrivers
1 x PLCC Puller
2 x Replacement glue sticks for HKP 220
1 x 3-jaw chuck centrically clamping 80mm
1 x Complete Engraving Kit with trial glass
2 x TUNER 200ml
1 x Insulation Resistance Tester MG500
1 x TU 1503V
1 x TU 2404
1 x Hand magnifier with LED light 3X
1 x PLCC Extractor
2 x Engraving tool GG
2 x SPRAYFLON 200ml
1 x Belt sander BBS/S
2 x TOP-PIN 200ml
2 x TIP SPT-10
2 x TIP SPT-9
1 x Disc Sander TG 125/E
1 x MICROFLAME burner MFB/E
1 x PROTECTION 200ml
1 x Antiallergical Tweezers 5-125-1
2 x DUSTER-BR 200ml
2 x TIP SPT-4
1 x Cutting tool 16 mm
2 x ANTISTATIC 200ml
2 x sandpaper for PS 13 Grot 180
1 x Coarse-toothed blades (No. 3: 34 teeth per 25mm)
2 x TIP SPT-3
1 x TU 2004V
2 x Coarse-toothed blades (No. 3: 41 teeth per 25mm)
2 x MULTI 200ml
1 x Belt sander BS/E
2 x Angle polisher WP/E
1 x Steel tape measure
2 x DEGRESER 200ml
2 x Cross-recess Screwdrivers 1
1 x Antiallergical Tweezers 5-121-1
1 x Wood Lathe DB450
1 x IC tweezers
1 x MICRO Screwdriver MIS 1. Complete with 16 inserts.
1 x MICROMOT steel collet set
2 x SPRAYOIL 200ml
1 x CRIMPING PLIERS/WIRE STRIPPER
1 x BeeHive204
1 x MICRO Heat gun MH 550
2 x Coarse-toothed blades (No. 5: 36 teeth per 25mm)
1 x FLUX-OFF 400ml
1 x MICROFLAM gas soldering set MGS
1 x Antiallergical Tweezers 5-155-1
3 x PRINTER 200ml
2 x PROLUB 200ml
1 x Crimping plier for BNC
2 x Universal holder UHZ
1 x Table Saw TKS 2500 SC
2 x Screwdriver 2.5
3 x V-slot cutter 6.5mm
1 x Slot cutter 5.0mm
3 x 10-piece wood router cutter set
1 x Bottom PSOP44 NOR-2
2 x Angle cutter 45 °
1 x SmartProg2
1 x Cross-recess Screwdrivers 00
1 x Beeprog2C
2 x End mill for aluminium 4mm
1 x Tungsten Carbide Tipped (TCT)
2 x Screwdriver 2.0
3 x Rebating cutter 6.4mm
2 x Coarse-toothed blades (No. 1: 50 teeth per 25mm)
1 x Multipurpose Vices Primus 75
1 x Felt cloth polishing disc (100 x 15mm)
3 x Cutting tools of high quality cobalt HSS steel, ground
3 x Coarse-toothed blades (No. 9: 14 teeth per 25mm)
2 x FLUX DISPENSING PEN, LEAD FREE
2 x Rounding over cutter 6.4mm
2 x Collet chuck ER25 for D250X550
1 x Cotton polishers
2 x Screwdriver 1.0
1 x Cotton polishers
1 x Cutting tools of high quality cobalt HSS steel, ground
1 x Slot cutter 3.2mm
1 x Boring Bar for CCMT 8mm
1 x Side cutters 160mm
2 x Professional polishing sponge
1 x TCMT110204
1 x Telephone pliers stright 205mm
1 x Cutting tool 8 mm
1 x ESD Brushe
1 x OPTI BF16 Vario
1 x Ball-shaped diamond coated 1.2mm
2 x surface planing and thicknessing ADH 200
2 x Coarse-toothed (18 TPI per 25mm)
2 x Universal polishing paste
1 x DIL44/PSOP44 ZIF 600 mil
2 x Coarse-toothed blades (No. 5: 17 teeth per 25mm)
1 x Screwdriver 3.0
1 x Combi cutter 6.5/2.5mm
1 x Coarse-toothed (25 TPI per 25mm)
1 x Polishing Set
4 x Precision steel vice PM 40
1 x Corundum bound cutting disc for LWS
1 x Safety Insulated Pozidriv Screwdriver 14-643VDE
1 x Screwdriver 1.5
1 x Corundum sanding discs for LWS
1 x End milling cutter kit HSS 20 pcs
1 x Cut off/mitre saw KGS 80
2 x Machine Vice MS 4
2 x Spiral blade. 125mm long with plain ends (without pins).
1 x 6-piece TORX-screwdriver-set ESD
2 x Slot cutter 6.5mm
2 x Screwdriver 3.0
3 x Precision lathe PD 250/E
1 x End mill for aluminium 6mm
2 x Cotton polishers
1 x Blade holders for DS 460
1 x TORX-screwdrivers T10
1 x Microfibre polishing wheel, 15-ply (100mm)
3 x HSS boring tool set, 6 pieces
2 x Screwdriver 2.5
1 x Corundum sanding discs for LWS
1 x Cutter head for copy and surface milling MT2
1 x SILICONE 200ml
1 x Cylinder shaped milling cutters
1 x Broca de alta duração de 2.2mm
1 x End mill for aluminium 3mm
1 x Cylinder sander WAS/E
2 x Coarse-toothed (10 TPI per 25mm)
2 x Precision Vice FMS 75
1 x Crosscut 'Super-Cut' blade
1 x 6-piece screwdriver and cross-recess set
1 x Bottom PSOP44 NOR-1
2 x Table Sawr TKS 315 E
1 x replacement glass fibre for 2-166 Ø 4mm (PU 10)
1 x BeeProg2
1 x Conjunto de três brocas de ponto
1 x Screwdriver 2.0
1 x surface planing and thicknessing ADH 250
1 x MICRO Miller FF 230
1 x Cylindrical cutters
1 x 6-piece set of ESD/EGB tweezers
1 x Solid carbide saw blade
1 x Self-adhesive silicone carbide sanding discs for TSG 250/E
1 x Face clamping disc for D250X550
1 x Grinding mop cylinder grit 80
1 x Silicon-Carbide.
1 x Polishing paste
1 x Fibre-Cut Discs
2 x Replacement belts for BSL 220/E
1 x quantum revolving center CM2
1 x Special Fused Alumina (Hardness N).
1 x Professional set for finish grinding and polishing
2 x Felt polishers
1 x Wheels brushes
1 x Felt polishers
2 x Lathe tools 10mm pastilhados
1 x ESD Tweezers 5-193
1 x Brass brushes
1 x Fibre-Cut Discs
1 x MICROMOT 50/E
1 x Super-fine sanding discs grain 000
2 x Backing disc for LWS
1 x Sanding pads for OZI 220/E grit 80
1 x Grinding mop cylinder grit 120
1 x Felt polishers
1 x Three piece thread cutting set
1 x Sanding Drums
1 x Jig saw blades made of HSS
1 x Tool holder type D for SWH 1-A
1 x Cutting disc, with reinforcement
1 x Lathe System PD 400
1 x Three-jaw steel drill chuck
1 x Extra narrow bandsaw blade (3.5mm) for tight radii
1 x EUROline set of pliers
1 x Fixed Steady
1 x EUROline end cutter
1 x Stainless steel brushes
1 x Tool holder type H for SWH 1-A
1 x Universal and oil siphoning pump AP 12
1 x Half round cutter 13mm
1 x Flexible polishing pad set
1 x lathe tools 10mm
1 x Long neck angle milling/drilling unit LWB 220/E
1 x 4-jaw chuck individually clamping 125mm
1 x Morse taper MT2 - B16
1 x Tungsten carbide drills Ø1mm
1 x Saw blade made of high-alloy special steel
1 x Step clamps made of steel
1 x Mini side cutters EUROline-Conductive
1 x Cutting tool 10 mm
2 x Follow rest for D250X550
1 x Self-adhesive silicone film for easy sanding disc replacement
1 x Flame shaped milling cutters
1 x Steady rest for D250X550
1 x Grinding mop cylinder grit 240
1 x Screwdriver 2.5
1 x Diamond Grinding Bits 5mm
1 x Wire strippers 165mm
1 x Polishing felt, medium hard
1 x Replacement belts for BSL 220/E
€27,534.41
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
We Accept
Manufacturer Info
CRAMOLIN
CRAMOLIN Homepage
Other products
Languages
Portugues English
Share Product
Share on Facebook