Top » Catalog » Programmers and acessories » Socket converters » Converters » DIL/BGA » 70-0245/0242

€395.00 + VAT

BGA-0245/0242
[70-0245/0242]

BGA-0245/0242

special converter, assigned for memories in BGA package, for example S29AL016MxxBxx01 in BGA48
top board: BGA-Top-2 ZIF-CS (order no. 70-0242)
bottom board: BGA-Bottom-1 (order no. 70-0245)
ZIF socket accepts many variations of BGA packages, that differ in ball diameter, ball width and package thickness.
The picture at Accepted package(s) section shows the range of all dimensions of BGA packages, which are accepted by this BGA-Top board.
operation life of ZIF socket - 500.000 actuations
order no.: 70-0245/0242

socket: ZIF BGA48 (accept package up to 48 balls), ClamShell type
bottom: 2 rows, 2x 24 pins, square, 0.6x0.6mm, rows spacing 600mil

Converter manual

Insert converter to the programmer ZIF socket according to the picture placed near of it. If you have some doubts about orientation of this converter in programmer ZIF socket, it is valid general rule, the orientation of the text of title is the same as the text on the top of the programmer.
Open the converter ClamShell ZIF socket. Insert the device into it (place device on contacts). The right position of the programmed device in converter ZIF socket is show on the picture in control program PG4UW (Device info for selected device).
Visually check position of device in converter ClamShell ZIF socket. If everything looks OK, close it and now, device is ready for programming.
Be careful, because the incorrect insertion of converter to the programmer ZIF socket or device to the converter ClamShell ZIF socket can damage the programmed device.
To take out the device, open converter ClamShell ZIF socket and remove device from it.
When you finish work with converter, remove it from the programmer ZIF socket.
Do not directly touch the pins of the converter and converter ZIF socket, because dirt may cause errors during programming of device.
For handling with the device we recommended to use a vacuum pick up tool.
The picture show, how to put together the BGA-Top-x ZIF-CS and BGA-Bottom-x boards to have complete BGA converter

Reviews

Categories

Band Saw Blades
Butane soldering iron->
carpentry tools->
Chips Extractor
Componentes de elétronica->
Contact cleaner brush
Crimping Tools
Drilling-milling machine->
Drills->
Elecronic pliers->
Electronic Screwdrivers->
ESD Tools->
Inspection mirror
Insulation Resistance Tester
Lathes->
Magnifying->
Mesure tools
Micromot tools->
Programmers and acessories->
  GANG programmers
  Socket converters->
    Converters->
      DIL/BGA
      DIL/LQFP
      DIL/MLF
      DIL/MQFP
      DIL/PLCC
      DIL/PQFP
      DIL/PSOP
      DIL/QFN
      DIL/QFP
      DIL/QSOP
      DIL/SDIP
      DIL/SOIC
      DIL/SOT
      DIL/SSOP
      DIL/TQFP
      DIL/TSOP
      DIL/TSSOP
      DIL/VQFP
    submodule
  Universal programmers
Safety insulated screwdrivers->
Safety Isulated Pliers->
Service case
Service Case->
Solder and Flux->
Soldering Iron and station
Sprays->
Torque Screwdriver
Tweezers->
Warding files

Manufacturers

Information

Shipping & Returns
Privacy Notice
Conditions of Use

Shopping Cart

1 x	Tungstein carbide rasp - and cutting disc
2 x	Sanding fleece for LWS
2 x	Corundum sanding discs for LWS
1 x	Saw blade made of high-alloy special steel
2 x	Corundum grinding disc for LWS
1 x	Sanding fleece for LWS
1 x	Corundum fan sander for LWS
2 x	Diamond-coated cutting and roughing disc
1 x	Hand Magnifier 2-293
1 x	Coarse-toothed blades (No. 3: 41 teeth per 25mm)
2 x	Corundum grinding disc for LWS
1 x	Hand magnifier with LED light 3X
1 x	Super-Cut
2 x	Replacement cutting disc for MICRO cutter MIC
1 x	Diamond-coated cutting disc for MIC
1 x	Step clamps made of steel
1 x	surface planing and thicknessing ADH 250
1 x	MICROMOT Mains Adapter NG 2/E
3 x	surface planing and thicknessing ADH 200
1 x	Tungsten tipped saw blade
1 x	Supercut jig saw blades of special steel
1 x	MICROMOT Mains Adapter NG 2/S
1 x	sanding belts for BBS/s Grit 150
1 x	High quality corundum grinding bits
1 x	sandpaper for PS 13 Grot 180
1 x	Fixed Steady
2 x	Rounding over cutter 6.4mm
1 x	BGA-Bottom-2
1 x	Belt sander BBS/S
1 x	Felt cloth polishing disc (100 x 15mm)
1 x	Diamond Cutting Discs
2 x	Radius Cutting Attachment, complete with pointed tool
2 x	Spiral blade. 125mm long with plain ends (without pins).
2 x	Rebating cutter 6.4mm
1 x
1 x	DIL28/PLCC84 ZIF HS538ESC01H
2 x	Slot cutter 5.0mm
1 x	Centre Turning Attachment
1 x	Drill chuck with sliding sleeve for the tailstock
1 x	DIL16W/SOIC16 ZIF 300mil
1 x	High quality corundum grinding bits
1 x	V-slot cutter 6.5mm
1 x	BGA-Bottom-209
1 x	Super-fine sanding discs grain 400
1 x	Three jaw chuck for the lathe DB 250
1 x	Flame shaped milling cutters
2 x	Treated muslin polishing wheel, stiff (100 x 15mm)
2 x	Combi cutter 6.5/2.5mm
1 x	Bandsaw blade of bimetal for MBS 240/E
1 x	Engraving tool GG
1 x	Fibre-Cut Discs
1 x	MICROMOT drill stand MB 200
1 x	Coarse-toothed blades (No. 5: 36 teeth per 25mm)
1 x	Super-fine sanding discs grain 000
1 x	BeeProg2
1 x	DIL44/PLCC44 ZIF
1 x	Four Jaw Chuck
1 x	Coarse-toothed blades (No. 5: 17 teeth per 25mm)
1 x	DIL28/QFN28-2 ZIF-CS
1 x	Slot cutter 6.5mm
1 x	DIL24W/SOIC24 ZIF 300mil
1 x	Collet Set for accurate use on round components
1 x	Special Fused Alumina (Hardness N).
1 x	Cutting disc, with reinforcement
1 x	Felt polishers
1 x	Replacement carving blades for MSG
1 x	Gear Chuck
1 x	Wolfram vanadium steel milling bits
1 x	Flexible silicon discs
1 x	Belt sander BS/E
1 x	DIL14W/SOIC14 ZIF 150mil
1 x	Flap Wheels
1 x	Ball shaped milling cutters
1 x	DIL28W/SOIC28 ZIF 300mil
1 x	DIL28/PLCC32 ZIF EPROM
1 x	DIL20/SOIC20 ZIF 300 mil
1 x	Rasp plate with metal burrs made from wolfram carbide for LWS
1 x	BGA-Bottom-212
1 x	DIL24/TSSOP24 ZIF 170mil
1 x	Bottom PSOP44 NOR-3
1 x	Sanding Discs
1 x	BGA-Bottom-201
1 x	Sanding Drums
1 x	Coarse-toothed blades (No. 9: 14 teeth per 25mm)
1 x	Flexible silicon discs
1 x	Half round cutter 13mm
1 x	Coarse-toothed (10 TPI per 25mm)
1 x	DIL20W/PLCC20 ZIF
1 x	Replacement glue sticks for HKP 220
1 x	Microfibre polishing wheel, 15-ply (100mm)
1 x	2-speed scroll saw DSH
1 x	Replacement belts for BSL 220/E
1 x	Universal and oil siphoning pump AP 12
1 x	BGA-Bottom-218
1 x	Flap Wheels
1 x	DIL28/QFP52 ZIF-CS SX52
1 x	Coarse-toothed blades (No. 3: 34 teeth per 25mm)

€6,743.16