Top » Catalog » Drilling-milling machine » End mill » 3350212

€198.00 + VAT

Cutter head for copy and surface milling MT2
[3350212]

Cutter head for copy and surface milling “Made in Germany”

Universal insert to treat all steel and NE metals
For surface and copy milling
Made of special steel - highly coated
High surface and concentricity accuracy
Milling body with offset division for very smooth running and constant cutting
Base body and clamping shank form a unit, thus short projection length and stable tension
No additional milling plug-in mandrel is being used
Special geometry for milling at high speed
Economical, because the plate can be further turned with blunt cutter (can be used up to 12 times)
Incl. 5 indexable inserts RDET 1003 MOSN 8026 · Torx TX15

Technical data - MT 2
Number of cutters - 5
Outside diameter - 52 mm
Seat shaft - MT2/M10
Indexable inserts - Ø 10 mm
ISO designation - RDX. 1003 D52/R5

Reviews

Categories

Band Saw Blades
Butane soldering iron->
carpentry tools->
Chips Extractor
Componentes de elétronica->
Contact cleaner brush
Crimping Tools
Drilling-milling machine->
  End mill
  End miller cutter->
  Optimum Drilling-milling machine
  Optimum-Quantum accessories->
  Proxxon Drilling-milling machine
Drills->
Elecronic pliers->
Electronic Screwdrivers->
ESD Tools->
Inspection mirror
Insulation Resistance Tester
Lathes->
Magnifying->
Mesure tools
Micromot tools->
Programmers and acessories->
Safety insulated screwdrivers->
Safety Isulated Pliers->
Service case
Service Case->
Solder and Flux->
Soldering Iron and station
Sprays->
Torque Screwdriver
Tweezers->
Warding files

Manufacturers

Information

Shipping & Returns
Privacy Notice
Conditions of Use

Shopping Cart

1 x	Diamond-coated cutting and roughing disc
1 x	Micro Compound Table KT 70
1 x	Blade for Steel and brass
1 x	Multipurpose Vices Primus100
1 x	Glass fibre contact cleaner brush
1 x	Replacement glue sticks for HKP 220
1 x	Universal and oil siphoning pump AP 12
1 x	Protective device for hand-operated MICROMOT
1 x	MICROMOT extension cord. 300cm.
1 x	CRIMPING PLIERS FOR CONNECTOR TYPES HT-210C
1 x	Chuck for TBM 220
1 x	MICROMOT Mains Adapter NG 2/E
2 x	Independent four jaw chuck for the DB 250
1 x	Grinding mop cylinder grit 120
2 x	Professional set for finish grinding and polishing
1 x	Compact workshop vacuum cleaner CW-matic
1 x	Belt sander BBS/S
1 x	Lambswool polishing disc
1 x	Dividing attachment TA 230 for PF 250
1 x	ROTARY COAXIAL CABLE STRIPPER 3-STEPS
1 x	Grinding mop cylinder grit 80
1 x	Step clamps made of steel
1 x	Coarse-toothed blades (No. 5: 36 teeth per 25mm)
1 x	Replacement belts for BSL 220/E
1 x	14-piece parallel supports set
1 x	Three-jaw steel drill chuck
1 x	Delta sander OZI/E
1 x	Diamond blade for MBS 240/E
1 x	Felt cloth polishing disc (100 x 15mm)
1 x	Brass contact cleaner brush
1 x	Router base OFV
1 x
1 x	Coarse-toothed blades (No. 3: 34 teeth per 25mm)
1 x	Backing disc for LWS
1 x	Super-fine sanding discs grain 2000
1 x	Replacement cutting disc for MICRO cutter MIC
1 x	MICROMOT Mains Adapter NG 2/S
1 x	Super safety and specialty bit set, 75-piece
1 x	HSS 1,065 x 6 x 0.6mm Dentado variável 10-14 TPI
2 x	Super-fine sanding discs grain 000
1 x	Screwdriver bit set. 49-piece.
1 x	Mill/Drill Unit BFB 2000.
1 x	Super-fine sanding discs grain 400
1 x	MICROMOT drill stand MB 200
1 x	Pensander PS 13
1 x	Long neck angle grinder LHW
1 x	Five piece HSS chisel set
1 x	Belt sander BS/E
1 x	Disc Sander TG 125/E
1 x	Cylinder sander WAS/E
1 x	MICROMOT steel collet set

€2,290.58