Top » Catalog » Programmers and acessories » Socket converters » Converters » DIL/BGA » 70-0254/0241

€395.00 + VAT

BGA-0245/0241
[70-0254/0241]

BGA-0245/0241

special converter, assigned for memories in BGA package, for example Am29DL164CBxxWC in FBGA48
top board: BGA-Top-1 ZIF-CS (order no. 70-0241)
bottom board: BGA-Bottom-1 (order no. 70-0245)
ZIF socket accepts many variations of BGA packages, that differ in ball diameter, ball width and package thickness.
The picture at Accepted package(s) section shows the range of all dimensions of BGA packages, which are accepted by this BGA-Top board.
operation life of ZIF socket - 500.000 actuations
order no.: 70-0245/0241

socket: ZIF BGA48 (accept package up to 48 balls), ClamShell type
bottom: 2 rows, 2x 24 pins, square, 0.6x0.6mm, rows spacing 600mil

Converter manual

Insert converter to the programmer ZIF socket according to the picture placed near of it. If you have some doubts about orientation of this converter in programmer ZIF socket, it is valid general rule, the orientation of the text of title is the same as the text on the top of the programmer.
Open the converter ClamShell ZIF socket. Insert the device into it (place device on contacts). The right position of the programmed device in converter ZIF socket is show on the picture in control program PG4UW (Device info for selected device).
Visually check position of device in converter ClamShell ZIF socket. If everything looks OK, close it and now, device is ready for programming.
Be careful, because the incorrect insertion of converter to the programmer ZIF socket or device to the converter ClamShell ZIF socket can damage the programmed device.
To take out the device, open converter ClamShell ZIF socket and remove device from it.
When you finish work with converter, remove it from the programmer ZIF socket.
Do not directly touch the pins of the converter and converter ZIF socket, because dirt may cause errors during programming of device.
For handling with the device we recommended to use a vacuum pick up tool.
The picture show, how to put together the BGA-Top-x ZIF-CS and BGA-Bottom-x boards to have complete BGA converter

Reviews

Categories

Band Saw Blades
Butane soldering iron->
carpentry tools->
Chips Extractor
Componentes de elétronica->
Contact cleaner brush
Crimping Tools
Drilling-milling machine->
Drills->
Elecronic pliers->
Electronic Screwdrivers->
ESD Tools->
Inspection mirror
Insulation Resistance Tester
Lathes->
Magnifying->
Mesure tools
Micromot tools->
Programmers and acessories->
  GANG programmers
  Socket converters->
    Converters->
      DIL/BGA
      DIL/LQFP
      DIL/MLF
      DIL/MQFP
      DIL/PLCC
      DIL/PQFP
      DIL/PSOP
      DIL/QFN
      DIL/QFP
      DIL/QSOP
      DIL/SDIP
      DIL/SOIC
      DIL/SOT
      DIL/SSOP
      DIL/TQFP
      DIL/TSOP
      DIL/TSSOP
      DIL/VQFP
    submodule
  Universal programmers
Safety insulated screwdrivers->
Safety Isulated Pliers->
Service case
Service Case->
Solder and Flux->
Soldering Iron and station
Sprays->
Torque Screwdriver
Tweezers->
Warding files

Manufacturers

Information

Shipping & Returns
Privacy Notice
Conditions of Use

Shopping Cart

2 x	machine base with shelves for D250X550
3 x	PRINTER 200ml
1 x	Precision quick-action drill chuck 0-13mm B16
1 x	Broca de alta duração de 1.0mm
2 x	Screwdriver 2.0
1 x	EUROline set of pliers
2 x	Broca de alta duração de 2.8mm
2 x	Super jig saw STS/E
1 x	Combination pliers 210mm
1 x	DEGRESER 200ml
1 x	Conj 5 pinças ESD
1 x	Cutter head for copy and surface milling MT3
2 x	Cross-recess Screwdrivers 1
2 x	Morse taper MT2 - B16
1 x	Screwdriver 3.0
2 x	Telephon pliers bent 160mm
1 x	Safety Insulated Pozidriv Screwdriver 14-641VDE
1 x	3-jaw chuck centrically clamping 125mm
1 x	TORQUE-SCREWDRIVER 1.5 - 4.0 Nm
2 x	TUNER 200ml
2 x	Core box bit 3.2mm
1 x	Safety Insulated Phillips Screwdriver 14-632VDE
1 x	Cylindrical cutters
2 x	Lathe tools 10mm pastilhados
1 x	Tweezer teflon-coated 5-021-9
1 x	Combination pliers 205mm
2 x	Broca de ponto 3.15 x 1.00
3 x	Rebating cutter 6.4mm
1 x	Screwdriver 1.8
1 x	Slot cutter 5.0mm
1 x	Long neck angle grinder LHW
2 x	Slot cutter 3.2mm
1 x	Long neck straight drill/grinder LB/E
2 x	Precision caliper square
2 x	EUROline-Conductive set of pliers
2 x	Slot cutter 6.5mm
1 x	MICROMOT 230/E
1 x	quantum revolving center CM2
1 x	Screwdriver 2.0
1 x	MICROMOT 50/EF
1 x	Edge cutter with pin 6.4mm
1 x	Screwdriver 1.2
1 x	lathe tools 10mm
1 x	magnetic base 80kg
2 x	Pensander PS 13
1 x	Side cutters 180mm
1 x	Screwdriver 3.0
1 x	Combination pliers 160mm
1 x	Insulation Resistance Tester MG500
1 x	Round nose pliers 160mm
1 x	ACCENT SERVICE TOOLS SET
1 x	Component tweezers 5-007
1 x	Lambswool polishing disc
3 x	Super-fine sanding discs grain 000
1 x	Socket Wrenches 3.5
1 x	Screwdriver 2.5
2 x	Cylinder sander WAS/E
1 x	6-piece wrench key set ESD
1 x	MICRO Miller FF 230
1 x	Professional polishing sponge
1 x	VIDEOCLEAN 200ml
2 x	Combi cutter 6.5/2.5mm
2 x	Delta sander OZI/E
1 x	Rounding over cutter 6.4mm
2 x	Polishing felt, medium hard
1 x	Disc Sander TG 125/E
2 x	CRIMPING PLIERS/WIRE STRIPPER
1 x	Precision quick-action drill chuck 0-10mm B16
1 x	Corundum bound cutting disc for LWS
1 x	6-piece screwdriver and cross-recess set
1 x	Broca de ponto 8.00 x 3.15
1 x	CD-CLEANER 200ml
1 x	Combination pliers 190mm
2 x	Handy 1515
1 x	Self-adhesive white corundum sanding discs for TG 125/E
2 x	MICRO Miller FF 500
1 x	SILICONE 200ml
1 x	magnifier 3.25 x Ø 45mm with additional lens
1 x	Parting tool 10mm
1 x	10-piece wood router cutter set
1 x	Boring Bar for CCMT 16mm
1 x	SPRAYOIL 200ml
2 x	Tool holder type H for SWH 1-A
1 x	Cross-recess Screwdrivers 1
1 x	Belt sander BBS/S
2 x	sclcr2525M12
1 x	Polishing machine PM 100
2 x	SPRAYFLON 200ml
1 x	EUROline mini side cutter
1 x	MULTI 200ml
1 x	Belt sander BS/E
1 x	Contact bracelet with spiral cord
1 x	PROTECTION 200ml
1 x	replacement glass fibre for 2-166 Ø 4mm (PU 10)
1 x	Side cutters 170mm
1 x	ESD Brushe
1 x	Ceramic-tipped tweezers and ESD 5-096
1 x	PROLUB 200ml
1 x	Blade for Wood and Plastics
1 x	Set of precision cutters
1 x	Cross-recess Screwdrivers 00
1 x	ESD Tweezers 5-192
1 x	Sanding fleece for LWS
1 x	Screwdriver bit set. 49-piece.
1 x	Conjunto de três brocas de ponto
1 x	TIP SPT-9
2 x	Flat nose pliers 160mm
1 x	Hot wire cutter THERMOCUT 650
1 x	DUSTER-BR 200ml
1 x	Combination pliers 185mm
2 x	Felt cloth polishing disc (100 x 15mm)
1 x	EUROline side cutter rounded head
1 x	EUROline snipe nose pliers
1 x	FREEZER-BR 200ml
1 x	Side cutters 160mm
1 x	Broca de alta duração de 2.9mm
2 x	Insulation Resistance Tester MG125
1 x	FLUX DISPENSING PEN, LEAD FREE
1 x	Self-adhesive white corundum sanding discs for TG 125/E
1 x	Telephone pliers stright 205mm
2 x	TIP SPT-4
1 x	Collet chuck ER25 for D250X550
2 x	Crimping plier for BNC
2 x	Super-fine sanding discs grain 2000
1 x	Socket Wrenches 4.5
2 x	Microfibre polishing wheel, 15-ply (100mm)
1 x
2 x	Treated muslin polishing wheel, stiff (100 x 15mm)
1 x	MICRO Band Saw MBS 240/E
1 x	Cross-recess Screwdrivers 2
1 x	TIP SPT-2
1 x	Hot wire cutter THERMOCUT 230/E
1 x	TCMT090204
1 x	Disc cutters
1 x	TCMT110204
1 x	TORQUE-SCREWDRIVER 0.5 - 1.5 Nm
1 x	SCMT09T304
1 x	Insert LGTN-3
1 x	Long neck angle milling/drilling unit LWB 220/E
1 x	V-slot cutter 6.5mm
1 x	Super-fine sanding discs grain 400
1 x	Scroll saw DS 230/E
1 x	Threading inserts 60º
1 x	Tungsten Carbide Tipped (TCT)
2 x	STRIPPING TOOL WITH ADJUSTABLE KNIVES
1 x	Aluminium Die-Cast
1 x	ROTARY COAXIAL CABLE STRIPPER 3-STEPS
1 x	Cross-recess Screwdrivers 2
1 x	Diamond Twist Drills
1 x	EUROline mini side cutter
2 x	End milling cutter kit HSS 12 pcs
1 x	Earth wire with dummy Schunko-plug
1 x	6-piece socket wrenches ESD
1 x	broca de alta duração de 0,2mm
1 x	6-piece TORX-screwdriver-set
1 x	Titan Tweezers 5-031
1 x	VASELINE 200ml
1 x	Machine Vice MS 4
1 x	sanding belts for BBS/s Grit 240

€13,299.95