€6,950.00 + VAT

BeeHive208S
[60-0054]

BeeHive208S

BeeHive208S

Extremely fast universal 8x 48-pin-drive Stand-Alone concurrent Production Programmer ( multiprogramming system )

 
Elnec fully understand needs of customers programming high volumes for which cost of adapters is one of most important component of costs. Therefore Elnec policy is to offer:

Short description:

  • supported devices from manufacturers by 2.76 version of SW (27. Jan. 2011)
  • eight independent universal programming modules (BeeProg2 based) in one unit
  • extremely fast programming, one of the fastest programmers in this category. Programs 64-Mbit NOR Flash memory in less than 9 seconds and 1Gbit NAND Flash in less than 70 sec.
  • powerful independent pin-driver circuit for each and every pin of the programmer
  • in-circuit programming capability through ISP connector
  • graphics control unit with touch screen
  • very low voltage support for the latest Flash memory chips
  • ESD protection on each pin of the sockets
  • no adapter required for any DIL devices
  • Windows XP Embedded driven control PC internal to the programmer
  • unique quick reaction to customer\'s needs - software update can be ready within a day from request by OnDemand software
  • made in Slovakia
  • warranty - 3 years

Please see the full information in http://www.elnec.com/products/production-programmers/beehive208s/

 


Reviews
Manufacturers
1 x Safety Insulated Phillips Screwdriver 14-631VDE
1 x Step clamps made of steel
1 x MICROMOT tool holder
1 x Blade for Wood and Plastics
1 x CD-CLEANER 200ml
1 x Blade for Steel and brass
1 x Cylinder sander WAS/E
1 x Long neck angle grinder LHW
1 x Collet chuck ER25 for D250X550
1 x Universal polishing paste
1 x MICROMOT drill stand MB 200
1 x Mini side cutters EUROline-Conductive
1 x Snipe nose pliers 45º EUROline-Conductive
1 x Pensander PS 13
1 x MICROFLAM gas soldering set MGS
1 x Band knife of hardened spring band steel (without teeth)
1 x FLUX-OFF 400ml
1 x Lathe tools 10mm pastilhados
1 x lathe tools 10mm
1 x Lathe chuck flange for D250X550
1 x Steady rest for D250X550
1 x Dividing attachment TA 230 for PF 250
1 x MICRO Screwdriver MIS 1. Complete with 16 inserts.
1 x Face clamping disc for D250X550
1 x MICROMOT Mains Adapter NG 2/S
1 x Felt cloth polishing disc (100 x 15mm)
1 x Side cutters EUROline-Conductive
1 x 14-piece parallel supports set
1 x MICROMOT Mains Adapter NG 5/E
1 x quantum revolving center CM2
1 x MICROFLAME burner MFB/E
1 x Drill chuck with sliding sleeve for the tailstock
1 x Insulation Resistance Tester MG125
1 x Three jaw chuck for the lathe DB 250
1 x Bandsaw blade of bimetal for MBS 240/E
1 x Footswitch FS
1 x Round nose pliers 45º EUROline-Conductive
1 x Insulation Resistance Tester MG500
1 x Quick-action tool holder kit SWH AA
1 x Mini side cutters EUROline-Conductive
1 x MICROMOT Mains Adapter NG 2/E
1 x Grinding mop cylinder grit 120
2 x Corundum fan sander for LWS
1 x Spiral blade. 125mm long with plain ends (without pins).
1 x Super-fine sanding discs grain 400
1 x Combination pliers 205mm
1 x Brass contact cleaner brush
1 x magnifier 3.25 x Ø 45mm with additional lens
1 x Broca de alta duração de 2.1mm
1 x Broca de alta duração de 2.6mm
1 x Multipurpose Vices Primus100
2 x STRIPPING TOOL WITH ADJUSTABLE KNIVES
1 x ROTARY COAXIAL CABLE STRIPPER 3-STEPS
1 x Jig saw STS 12/E
1 x Glass fibre contact cleaner brush
1 x HSS 1,065 x 6 x 0.6mm Dentado variável 10-14 TPI
1 x TORQUE-SCREWDRIVER 0.5 - 1.5 Nm
1 x Diamond-coated cutting disc for MIC
1 x Table Saw FET
1 x Cut off/mitre saw KGS 80
1 x Multiform grindstone
1 x Super-fine sanding discs grain 000
1 x Coarse-toothed (10 TPI per 25mm)
1 x Hand magnifier with LED light 3X
1 x SCREEN 200ml
1 x MICRO shaper MP 400
1 x PRINTER 200ml
€3,993.26
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
We Accept
Manufacturer Info
Elnec
Elnec Homepage
Other products
Languages
Portugues English
Share Product
Share on Facebook