TIP SPT-9, Oficina-digital.com

Top » Catalog » Butane soldering iron » Tips » SPT-9

Categories

Band Saw Blades
Butane soldering iron->
Butane solder irons
Tips
carpentry tools->
Chips Extractor
Componentes de elétronica->
Contact cleaner brush
Crimping Tools
Drilling-milling machine->
Drills->
Elecronic pliers->
Electronic Screwdrivers->
ESD Tools->
Inspection mirror
Insulation Resistance Tester
Lathes->
Magnifying->
Mesure tools
Micromot tools->
Programmers and acessories->
Safety insulated screwdrivers->
Safety Isulated Pliers->
Service case
Service Case->
Solder and Flux->
Soldering Iron and station
Sprays->
Torque Screwdriver
Tweezers->
Warding files

Manufacturers

Information

Shipping & Returns
Privacy Notice
Conditions of Use

Shopping Cart

1 x	Conj 5 pinças ESD
4 x	Inspector mirror
1 x	Core box bit 3.2mm
1 x	Drill chuck with sliding sleeve for the tailstock
1 x	MICROMOT Mains Adapter NG 2/E
1 x	Spare cutting wire
1 x	Edge cutter with pin 6.4mm
1 x	V-slot cutter 6.5mm
1 x	ESD Brushe
1 x	sandpaper for PS 13 Grit 240
1 x	Coarse-toothed (18 TPI per 25mm)
1 x	EUROline-Conductive set of pliers
1 x	Replacement cutting disc for MICRO cutter MIC
1 x	TIP SPT-6
1 x	Polishing machine PM 100
2 x	Tungsten Carbide Tipped (TCT)
1 x	Special Fused Alumina (Hardness N).
1 x	TIP SPT-9
1 x	Blade for Wood and Plastics
3 x	Inpection mirror 1-978
1 x	Tungsten carbide cutters set
1 x	Micro Compound Table KT 70
1 x	ACCENT SERVICE TOOLS SET
1 x	Coarse-toothed (10 TPI per 25mm)
1 x	Machine Vice MS 4
1 x	ESD-handling set
1 x	Slot cutter 3.2mm
1 x	Self-adhesive white corundum sanding discs for TG 250/E
1 x	Self-adhesive white corundum sanding discs for TG 125/E
1 x	MICROMOT Mains Adapter NG 2/S
1 x	Band knife of hardened spring band steel (without teeth)
1 x	Blade guides separately
1 x	Disc Sander TG 250/E
1 x	Coarse-toothed blades (No. 5: 36 teeth per 25mm)
1 x	MICROMOT Mains Adapter NG 5/E
1 x	Self-adhesive white corundum sanding discs for TG 250/E
1 x	Angle polisher WP/E
1 x	Silicon-Carbide.
1 x	Felt cloth polishing disc (100 x 15mm)
1 x	Independent four jaw chuck for the DB 250
1 x	Five piece HSS chisel set
1 x	Universal polishing paste
1 x	Supercut jig saw blades of special steel
1 x	Treated muslin polishing wheel, stiff (100 x 15mm)
1 x	TIP SPT-2
1 x	Extra narrow bandsaw blade (3.5mm) for tight radii
1 x	Pensander PS 13
1 x	Cylinder sander WAS/E
1 x	Rounding over cutter 6.4mm
1 x	Combi cutter 6.5/2.5mm
1 x	Self-adhesive white corundum sanding discs for TG 250/E
1 x	Ceramic-tipped tweezers and ESD 5-096
1 x	Coarse-toothed blades (No. 3: 41 teeth per 25mm)
1 x	Super-Cut
1 x	ESD Tweezers For The SMD-Technique - 6 Piece Set
1 x	Self-adhesive white corundum sanding discs for TG 125/E
1 x	Polishing Set
1 x	Coarse-toothed (25 TPI per 25mm)
1 x	Precision steel vice PM 40
1 x	Diamond blade for MBS 240/E
1 x	Rebating cutter 6.4mm
1 x	Coarse-toothed blades (No. 9: 14 teeth per 25mm)
1 x	10-piece wood router cutter set
1 x	Grinding and Polishing Machine SP/E
1 x	ESD Tweezers 5-193
1 x	Three jaw chuck for the lathe DB 250
1 x	TIP SPT-4
1 x	Blade for Steel and brass
1 x	Jig saw blades made of HSS
1 x	Self-adhesive silicone film for easy sanding disc replacement
1 x	Cutting disc, with reinforcement
1 x	Footswitch FS
1 x	Universal and oil siphoning pump AP 12
1 x	sandpaper for PS 13 Grit 400
1 x	Half round cutter 13mm
1 x	ESD Tweezers 5-195
1 x	Coarse-toothed blades (No. 5: 17 teeth per 25mm)
1 x	Self-adhesive white corundum sanding discs for TG 125/E

€2,466.19