€115.50 + VAT

Bench Circular Saw KS 230
[27006]

Bench Circular Saw KS 230

The 58 mm diameter Super-Cut blade cuts soft woods up to 8 mm, plastics (Pertinax too) up to approx 3 mm, NF metals up to approx 1.5 mm. Fibreglass reinforced PC cards could be cut with the tungsten blade. The 85 W VDE tested motor is quiet, operates off 220 - 240 V and has a prolonged life expectancy. The side door allows easy sawdust removal. Overall size approx. 240 x 180 x 80 mm. Weight 1.8 kg.

  1. Adjustable fence with scale.
  2. Machined, die-cast aluminium table (160 x 160 mm).
  3. Quiet, high performance 230 Volt VDE tested motor for prolonged use.
  4. Base of ABS with a saw dust door on the right.
  5. Super-Cut blade 58 mm diameter, 80 teeth, individually set and sharpened, is included.
  6. Graduated mitre stop.
Reviews

Customers who bought this product also purchased
Tungsten carbide cutter 1.0mm
Tungsten carbide cutter 1.0mm
Scroll saw DS 230/E
Scroll saw DS 230/E
Dial gauge
Dial gauge
Manufacturers
2 x Crosscut 'Super-Cut' blade
2 x Delta sander OZI/E
1 x Precision steel vice PM 40
2 x Side cutters 195mm
2 x 
1 x Super safety and specialty bit set, 75-piece
3 x Microfibre cloth
2 x Edge cutter with pin 6.4mm
1 x Polishing Set
2 x Brass contact cleaner brush
2 x Bench drill press TBH
1 x Tungsten tipped saw blade
2 x Diamond-coated cutting and roughing disc
3 x Diamond-coated cutting disc for MIC
1 x surface planing and thicknessing ADH 200
2 x Belt sander BBS/S
1 x sandpaper for PS 13 Grit 400
2 x Independent four jaw chuck for the DB 250
2 x Band knife of hardened spring band steel (without teeth)
2 x Slot cutter 3.2mm
1 x Precision caliper 500mm
3 x Grinding mop cylinder grit 80
3 x Core box bit 3.2mm
4 x HSS boring tool set, 6 pieces
1 x PLCC Puller
4 x Three piece thread cutting set
1 x Milling cutter set (6 - 10mm)
2 x TORQUE-SCREWDRIVER 1.5 - 4.0 Nm
2 x TORQUE-SCREWDRIVER 0.5 - 1.5 Nm
1 x replacement glass fibre for 2-166 Ø 4mm (PU 10)
1 x Glass fibre contact cleaner brush
1 x Glass fibre contact cleaner brush
1 x Milling cutter set (2 - 5mm)
2 x Half round cutter 13mm
1 x Coarse-toothed (10 TPI per 25mm)
1 x Rasp plate with metal burrs made from wolfram carbide for LWS
3 x Lathe System PD 400
1 x Compact workshop vacuum cleaner CW-matic
1 x Round nose pliers 45º EUROline-Conductive
1 x 14-piece parallel supports set
1 x TU 2404
2 x Fluted filter for CW-matic
1 x Cone shaped milling cutter
1 x MICROFLAM gas soldering set MGS
1 x Telephone pliers straight 205mm
1 x Snipe nose pliers 45º EUROline-Conductive
1 x Gear Chuck
1 x Snipe nose pliers 45º EUROline-Conductive
1 x Flap Wheels
1 x MICRO-screwdrivers
1 x Flexishaft MICROMOT 110/P
1 x Solid carbide stylus for engraving
1 x Grinding mop cylinder grit 120
1 x Tungsten carbide cutter 3.0mm
3 x Cutting tools of high quality cobalt HSS steel, ground
2 x Side cutters 160mm
1 x Mini side cutters EUROline-Conductive
1 x Diamond Grinding Bits 1,8mm
1 x Coarse-toothed (25 TPI per 25mm)
2 x Ball-shaped diamond coated 2.2mm
3 x Cutting tools of high quality cobalt HSS steel, ground
1 x Belt sander BS/E
1 x MICRO Screwdriver MIS 1. Complete with 16 inserts.
2 x Ball-shaped diamond coated 3.2mm
1 x Coarse-toothed blades (No. 5: 17 teeth per 25mm)
1 x Round nose pliers 165mm
1 x Cylinder shaped milling cutters
1 x Bench drill machine TBM 220
1 x High quality corundum grinding bits
1 x Flat nose pliers 165mm
4 x Backing disc for LWS
1 x Diamond Cutting Discs
1 x Blade holders for DS 460
2 x Angle cutter 45 °
1 x Angle polisher WP/E
1 x End side cutters EUROline-Conductive
1 x Corundum bound cutting disc for LWS
2 x EUROline-Conductive set of pliers
1 x Five piece HSS chisel set
2 x Combi cutter 6.5/2.5mm
1 x Set of special steel cutters
1 x Flexible silicon discs
2 x Polishing felt, medium hard
1 x Coarse-toothed blades (No. 5: 36 teeth per 25mm)
1 x Corundum grinding disc for LWS
1 x Tungsten carbide cutters set
1 x Coarse-toothed blades (No. 3: 34 teeth per 25mm)
1 x End side cutters 45º EUROline-Conductive
1 x Aluminium Die-Cast
1 x Four Jaw Chuck
1 x Corundum sanding discs for LWS
1 x 2-speed scroll saw DSH
2 x Super-fine sanding discs grain 400
1 x Diamond Grinding Bits 1mm
1 x Tungsten carbide cutter 1.0mm
2 x Professional set for finish grinding and polishing
1 x Mini side cutters EUROline-Conductive
2 x Lambswool polishing disc
1 x Telephone pliers bent 205mm
3 x 10-piece wood router cutter set
1 x MICRO Heat gun MH 550
1 x Rebating cutter 6.4mm
1 x Slot cutter 5.0mm
1 x Grinding and Polishing Machine SP/E
1 x Set of precision cutters
1 x Flat nose pliers 45º EUROline-Conductive
2 x Slot cutter 6.5mm
1 x Diamond Cutting Discs
1 x Flame shaped milling cutters
1 x Footswitch FS
1 x Diamond Twist Drills
2 x Super-fine sanding discs grain 2000
2 x Grinding mop cylinder grit 120
1 x Disc cutters
2 x Ball shaped milling cutters
1 x Mini side cutters EUROline-Conductive
1 x Diamond Grinding Bits 5mm
1 x Flexishaft MICROMOT 110/BF
1 x Bandsaw blade of bimetal for MBS 240/E
2 x Super-fine sanding discs grain 000
3 x Precision lathe PD 250/E
2 x Professional polishing sponge
1 x Complete Engraving Kit with trial glass
1 x Flexible polishing pad set
1 x Wolfram vanadium steel milling bits
1 x Diamond Cutting Discs
1 x MICROMOT glue gun HKP 220
1 x Wolfram vanadium steel milling bits
1 x Coarse-toothed blades (No. 3: 41 teeth per 25mm)
1 x Sanding fleece for LWS
1 x Insulation Resistance Tester MG125
2 x Replacement cutting disc for MICRO cutter MIC
1 x Cylindrical cutters
1 x Snipe nose pliers 45º EUROline-Conductive
1 x Spiral blade. 125mm long with plain ends (without pins).
2 x Ball-shaped diamond coated 1.2mm
1 x Corundum grinding disc for LWS
1 x Corundum sanding discs for LWS
1 x Corundum fan sander for LWS
1 x Combination pliers 210mm
1 x Flexible silicon discs
1 x Solid carbide stylus for engraving
1 x MICROFLAME burner MFB/E
1 x Tungsten carbide cutter 2.0mm
1 x Inspector mirror
1 x Coarse-toothed blades (No. 9: 14 teeth per 25mm)
1 x Side cutters EUROline-Conductive
1 x TU 1503V
1 x Flexible silicon discs
1 x Diamond Cutting Discs
2 x Rounding over cutter 6.4mm
1 x Wire strippers 165mm
1 x Engraving tool GG
1 x Router base OFV
1 x Flap Wheels
1 x Corundum fan sander for LWS
1 x TU 2004V
1 x V-slot cutter 6.5mm
1 x Combination pliers 190mm
1 x Flexible polishing pad set
1 x Diamond Grinding Bits 1,8mm
1 x Blade for Steel and brass
1 x ACCENT SERVICE TOOLS SET
1 x Self-adhesive white corundum sanding discs for TG 250/E
1 x Self-adhesive white corundum sanding discs for TG 250/E
1 x Wood Lathe DB450
1 x Wire strippers 160mm
1 x Self-adhesive silicone film for easy sanding disc replacement
1 x 6-piece wrench key set ESD
1 x Telephon pliers straight 160mm
1 x Multipurpose Vices Primus 75
1 x 6-piece TORX-screwdriver-set ESD
1 x Mill/Drill Unit BFB 2000.
1 x Machine Vice MS 4
1 x Precision Vice FMZ
1 x Multipurpose Vices Primus100
€21,420.65
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
We Accept
Manufacturer Info
PROXXON
PROXXON Homepage
Other products
Languages
Portugues English
Share Product
Share on Facebook