Top » Catalog » Torque Screwdriver » 4-562

€189.50 + VAT

TORQUE-SCREWDRIVER 1.5 - 4.0 Nm
[4-562]

TORQUE-SCREWDRIVER EUROLINE-POWER

Ergonomical formed two-coloured-components handle

Handle: impact-resistant, two-coloured plastic, with slip off protection and practical hanging up hole.

clear legible micrometer scale for a precise and perfect setting, torque adjusting without setting gauge

Torque mechanism: wear-resistant mechanism from hardened special steel, audible and touchable release signal

Lock mechanism: secure locking device by lock mechanism ( lock point = vernier line )

Actuating mechanism: system with changeable blades, left tightening with more or less unlimited removing, right tightening with adjusted torque.

Torque screwdrivers can be recalibrated and are in accordance with EN ISO 6789:2003

Torque-Screwdriver

Measure range Nm: 1.5 - 4.0
Scale Nm: 0.50
Fine scale mm: 0.10
Drive inner hexagon mm: 4
Length mm: 153
Weight: 137 g

Reviews

Categories

Band Saw Blades
Butane soldering iron->
carpentry tools->
Chips Extractor
Componentes de elétronica->
Contact cleaner brush
Crimping Tools
Drilling-milling machine->
Drills->
Elecronic pliers->
Electronic Screwdrivers->
ESD Tools->
Inspection mirror
Insulation Resistance Tester
Lathes->
Magnifying->
Mesure tools
Micromot tools->
Programmers and acessories->
Safety insulated screwdrivers->
Safety Isulated Pliers->
Service Case->
Service case
Solder and Flux->
Soldering Iron and station
Sprays->
Torque Screwdriver
Tweezers->
Warding files

Manufacturers

Information

Shipping & Returns
Privacy Notice
Conditions of Use

Shopping Cart

1 x	MICRO woodturning lathe DB 250
2 x	Table Saw FET
2 x	MICRO Band Saw MBS 240/E
1 x	MICRO shaper MP 400
1 x	Bench Circular Saw KS 230
1 x	Surface planer AH 80
1 x	Broca de alta duração de 2.6mm
1 x	Cylinder sander WAS/E
1 x	Super-fine sanding discs grain 000
1 x	TORQUE-SCREWDRIVER 1.5 - 4.0 Nm
2 x	Corundum fan sander for LWS
1 x	Micro Compound Table KT 70
1 x	MICROMOT Mains Adapter NG 5/E
1 x	Broca de alta duração de 2.8mm
1 x	Angle cutter 45 °
2 x	TORQUE-SCREWDRIVER 0.5 - 1.5 Nm
1 x	Diamond-coated cutting and roughing disc
1 x	TIP SPT-3
1 x	Spare cutting wire
1 x	Tungstein carbide rasp - and cutting disc
1 x	Safety Insulated Pozidriv Screwdriver 14-642VDE
1 x	Broca de alta duração de 3.0mm
2 x	Combi cutter 6.5/2.5mm
1 x	Grinding mop cylinder grit 80
1 x	Edge cutter with pin 6.4mm
1 x	Safety Insulated Pozidriv Screwdriver 14-643VDE
1 x	Table Saw TKS 2500 SC
1 x	TIP SPT-9
1 x	Diamond Cutting Discs
1 x	Flexible silicon discs
1 x	Nylon Fleece Brushes
1 x	Wolfram vanadium steel milling bits
2 x	Router base OFV
1 x	Cylindrical cutters
1 x	Solid carbide stylus for engraving
1 x	MICROFLAME burner MFB/E
1 x	Polishing paste
1 x	Belt sander BBS/S
2 x	Engraving tool GG
1 x	MICROFLAM gas soldering set MGS
1 x	Cups brushes
1 x	HSS drill bits 0.5mm
2 x	MICRO Heat gun MH 550
1 x	Flame shaped milling cutters
1 x	Flap Wheels
1 x	Flap Wheels
1 x	Complete Engraving Kit with trial glass
1 x	Diamond Cutting Discs
1 x	Sanding Drums
1 x	MICRO-screwdrivers
1 x	Ball shaped milling cutters
1 x	Set of precision cutters
1 x	Rebating cutter 6.4mm
1 x	Diamond Grinding Bits 1mm
1 x	MICRO Screwdriver MIS 1. Complete with 16 inserts.
1 x	Felt polishers
1 x	Stainless steel brushes
1 x	magnetic base 80kg
1 x	Tungsten carbide cutter 1.0mm
1 x	MICROMOT glue gun HKP 220
1 x	Side cutters 170mm
1 x	TIP SPT-4
1 x	Rounding over cutter 6.4mm
1 x	Diamond Cutting Discs
1 x	Milling cutter set (2 - 5mm)
1 x	HSS 1,065 x 6 x 0.6mm Dentado variável 10-14 TPI
1 x	Slot cutter 6.5mm
1 x	Hot wire cutter THERMOCUT 650

€5,980.53