Top » Catalog » Programmers and acessories » GANG programmers » 60-0054

€6,950.00 + VAT

BeeHive208S
[60-0054]

BeeHive208S

BeeHive208S

Extremely fast universal 8x 48-pin-drive Stand-Alone concurrent Production Programmer ( multiprogramming system )

 
Elnec fully understand needs of customers programming high volumes for which cost of adapters is one of most important component of costs. Therefore Elnec policy is to offer:

Short description:

  • supported devices from manufacturers by 2.76 version of SW (27. Jan. 2011)
  • eight independent universal programming modules (BeeProg2 based) in one unit
  • extremely fast programming, one of the fastest programmers in this category. Programs 64-Mbit NOR Flash memory in less than 9 seconds and 1Gbit NAND Flash in less than 70 sec.
  • powerful independent pin-driver circuit for each and every pin of the programmer
  • in-circuit programming capability through ISP connector
  • graphics control unit with touch screen
  • very low voltage support for the latest Flash memory chips
  • ESD protection on each pin of the sockets
  • no adapter required for any DIL devices
  • Windows XP Embedded driven control PC internal to the programmer
  • unique quick reaction to customer\'s needs - software update can be ready within a day from request by OnDemand software
  • made in Slovakia
  • warranty - 3 years

Please see the full information in http://www.elnec.com/products/production-programmers/beehive208s/

 
Reviews
Categories
Band Saw Blades
Butane soldering iron->
carpentry tools->
Chips Extractor
Componentes de elétronica->
Contact cleaner brush
Crimping Tools
Drilling-milling machine->
Drills->
Elecronic pliers->
Electronic Screwdrivers->
ESD Tools->
Inspection mirror
Insulation Resistance Tester
Lathes->
Magnifying->
Mesure tools
Micromot tools->
Programmers and acessories->
  GANG programmers
  Socket converters->
  Universal programmers
Safety insulated screwdrivers->
Safety Isulated Pliers->
Service case
Service Case->
Solder and Flux->
Soldering Iron and station
Sprays->
Torque Screwdriver
Tweezers->
Warding files
Manufacturers
Information
Shipping & Returns
Privacy Notice
Conditions of Use
Shopping Cart
4 x Surface planer AH 80
3 x Cutting tools of high quality cobalt HSS steel, ground
1 x Boring Bar for CCMT
1 x End side cutters 45º EUROline-Conductive
4 x Precision lathe PD 250/E
3 x Cut off/mitre saw KGS 80
4 x MICRO shaper MP 400
1 x Boring Bar for CCMT 16mm
1 x sclcr2525M12
1 x Boring Bar for CCMT 8mm
1 x Round nose pliers 45º EUROline-Conductive
2 x Lathe System PD 400
2 x Jig saw STS 12/E
2 x MICRO cutter MIC
1 x 6-piece screwdriver set ESD
1 x Boring Bar for DCMT 10mm
1 x Grinding mop cylinder grit 120
1 x Hot wire cutter THERMOCUT 12/E
1 x Gear Chuck
1 x HSS boring tool set, 6 pieces
1 x Precision steel vice PM 40
2 x MICRO woodturning lathe DB 250
3 x TORQUE-SCREWDRIVER 0.5 - 1.5 Nm
1 x Tungsten carbide cutters set
1 x Corundum grinding disc for LWS
1 x Grinding mop cylinder grit 80
1 x Precision quick-action drill chuck 0-13mm B16
1 x Fibre-Cut Discs
1 x Precision Vice FMZ
2 x Centre Turning Attachment
1 x Safety insulated screwdrivers 14-603 VDE
1 x Felt polishers
1 x Precision quick-action drill chuck 0-10mm B16
1 x Three jaw chuck for the lathe DB 250
1 x Corundum fan sander for LWS
1 x Lathe tools 10mm pastilhados
2 x 2-speed scroll saw DSH
2 x lathe tools 10mm
1 x Grinding mop cylinder grit 120
4 x TORQUE-SCREWDRIVER 1.5 - 4.0 Nm
1 x Corundum sanding discs for LWS
1 x Dial gauge
2 x Collet Set for accurate use on round components
1 x HSS twist drill set to DIN 338
1 x High quality corundum grinding bits
2 x Step clamps made of steel
1 x 4-jaw chuck individually clamping 125mm
1 x Felt cloth polishing disc (100 x 15mm)
2 x Super safety and specialty bit set, 75-piece
1 x Protective device for hand-operated MICROMOT
1 x Flexishaft MICROMOT 110/BF
1 x Diamond Coated
1 x CM2 - B16 - M10
1 x 4-jaw chuck individually clamping 80mm
1 x Replacement belts for BSL 220/E
1 x Conjunto de três brocas de ponto
1 x Fibre-Cut Discs
1 x Milling cutter set (2 - 5mm)
1 x Safety insulated screwdrivers 14-602 VDE
1 x Fibre-Cut Discs
1 x Safety insulated screwdrivers 14-608 VDE
1 x MICRO Miller FF 230
1 x High quality corundum grinding bits
2 x Scroll saw DS 230/E
1 x MICROMOT Mains Adapter NG 2/S
1 x Morse taper MT3 - B16
1 x Diamond Cutting Discs
1 x Five piece HSS chisel set
1 x Universal and oil siphoning pump AP 12
1 x Aluminium Die-Cast
1 x Wolfram vanadium steel milling bits
1 x Professional set for finish grinding and polishing
2 x Multipurpose Vices Primus100
1 x Precision quick-action drill chuck 0-16mm B16
1 x Flexishaft MICROMOT 110/P
1 x Fibre-Cut Discs
2 x Replacement carving blades for MSG
1 x High quality corundum grinding bits
1 x Corundum fan sander for LWS
1 x Flexible polishing pad set
1 x Fibre-Cut Discs
1 x Wolfram vanadium steel milling bits
1 x Sanding Discs
1 x Corundum sanding discs for LWS
1 x 3-jaw chuck centrically clamping 160mm
1 x Universal holder UHZ
1 x MICROMOT steel collet set
1 x Flexible polishing pad set
1 x Sanding Drums
1 x Radius Cutting Attachment, complete with pointed tool
2 x Super jig saw STS/E
1 x HSS twist drill set with centring pin
1 x Engraving tool GG
1 x Replacement belts for BSL 220/E
1 x Safety insulated screwdrivers 14-606 VDE
1 x Diamond-coated cutting and roughing disc
1 x MICROMOT Mains Adapter NG 2/E
2 x Dividing attachment TA 230 for PF 250
1 x MICRO Screwdriver MIS 1. Complete with 16 inserts.
1 x Mill/Drill Unit BFB 2000.
1 x 3-jaw chuck centrically clamping 125mm
1 x Hot wire cutter THERMOCUT 650
1 x Compact workshop vacuum cleaner CW-matic
1 x Multipurpose Vices Primus 75
1 x Diamond-coated cutting disc for MIC
1 x Safety insulated screwdrivers 14-601 VDE
1 x Cutting tool 8 mm
1 x Backing disc for LWS
1 x Precision quick-action drill chuck 0-10mm B16
1 x High quality corundum grinding bits
1 x Cutting tools of high quality cobalt HSS steel, ground
1 x 4-jaw chuck individually clamping 100mm
1 x MICROMOT Mains Adapter NG 5/E
1 x Thicknesser DH 40
1 x Tool holder for rotary tools
1 x Sanding Drums
1 x 
1 x centrically clamping 125mm
1 x Screwdriver bit set. 49-piece.
1 x Safety Insulated Phillips Screwdriver 14-634VDE
1 x lathe tools 12mm
1 x Polishing felt, medium hard
1 x Diamond Cutting Discs
1 x Chuck for TBM 220
1 x lathe tools 8mm
1 x Morse taper MT2 - B16
1 x Cutting tool 16 mm
1 x Replacement belts for BSL 220/E
1 x Polishing Set
1 x Precision quick-action drill chuck 0-8mm B16
1 x Bandsaw blade of bimetal for MBS 240/E
1 x Hot wire cutter THERMOCUT 230/E
1 x BeeHive208S
1 x Band knife of hardened spring band steel (without teeth)
€26,984.77
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
We Accept
Manufacturer Info
Elnec
- Elnec Homepage
- Other products
What's New?
Super-fine sanding discs grain 000
Super-fine sanding discs grain 000
€3.82
Languages
Portugues English
Share Product
Share on Facebook

Copyright © 2024 Oficina-digital.com
De acordo com a Lei nº 144/2015 informamos que em caso de litígio, o foro competente será o Centro de Arbitragem de Conflitos de Consumo de Lisboa.
Livro de Reclamações Online