Top » Catalog » Programmers and acessories » GANG programmers » 60-0054

€6,950.00 + VAT

BeeHive208S
[60-0054]

BeeHive208S

Extremely fast universal 8x 48-pin-drive Stand-Alone concurrent Production Programmer ( multiprogramming system )

Elnec fully understand needs of customers programming high volumes for which cost of adapters is one of most important component of costs. Therefore Elnec policy is to offer:

Short description:

supported devices from manufacturers by 2.76 version of SW (27. Jan. 2011)
eight independent universal programming modules (BeeProg2 based) in one unit
extremely fast programming, one of the fastest programmers in this category. Programs 64-Mbit NOR Flash memory in less than 9 seconds and 1Gbit NAND Flash in less than 70 sec.
powerful independent pin-driver circuit for each and every pin of the programmer
in-circuit programming capability through ISP connector
graphics control unit with touch screen
very low voltage support for the latest Flash memory chips
ESD protection on each pin of the sockets
no adapter required for any DIL devices
Windows XP Embedded driven control PC internal to the programmer
unique quick reaction to customer\'s needs - software update can be ready within a day from request by OnDemand software
made in Slovakia
warranty - 3 years

Please see the full information in http://www.elnec.com/products/production-programmers/beehive208s/

Reviews

Categories

Band Saw Blades
Butane soldering iron->
carpentry tools->
Chips Extractor
Componentes de elétronica->
Contact cleaner brush
Crimping Tools
Drilling-milling machine->
Drills->
Elecronic pliers->
Electronic Screwdrivers->
ESD Tools->
Inspection mirror
Insulation Resistance Tester
Lathes->
Magnifying->
Mesure tools
Micromot tools->
Programmers and acessories->
  GANG programmers
  Socket converters->
  Universal programmers
Safety insulated screwdrivers->
Safety Isulated Pliers->
Service case
Service Case->
Solder and Flux->
Soldering Iron and station
Sprays->
Torque Screwdriver
Tweezers->
Warding files

Manufacturers

Information

Shipping & Returns
Privacy Notice
Conditions of Use

Shopping Cart

5 x	Brass contact cleaner brush
2 x	Felt cloth polishing disc (100 x 15mm)
1 x	6-piece screwdriver and cross-recess set
1 x	ESD Tweezers 5-193
6 x	Precision magnetic gauge stand
1 x	Universal polishing paste
5 x	Precision caliper square
6 x	Steel tape measure
1 x	Hot wire cutter THERMOCUT 12/E
1 x	Safety Insulated Phillips Screwdriver 14-631VDE
1 x	Safety Insulated Phillips Screwdriver 14-634VDE
1 x	TIP SPT-10
5 x	Dial gauge
1 x	Telephone pliers bent 205mm
1 x	MICROMOT Mains Adapter NG 5/E
1 x	IT 200 - Indirect dividing attachment
1 x	TIP SPT-4
1 x	TIP SPT-3
1 x	DIL48/TSOP56 ZIF 18.4mm NOR-4
1 x	Combination pliers 210mm
1 x	TIP SPT-2
1 x	TIP SPT-6
5 x	Glass fibre contact cleaner brush
1 x	Flat nose pliers 165mm
4 x	Precision caliper 500mm
1 x	Hand magnifier with LED light 3X
5 x	Glass fibre contact cleaner brush
1 x	Cutting disc, with reinforcement
1 x	Insert CCGT060202-AK
5 x	magnetic base 80kg
5 x	Digital caliper gauge 300 mm
1 x	Supercut jig saw blades of special steel
6 x	Lever Dial Indicator
1 x	Hot wire cutter THERMOCUT 650
1 x	IT 150 - Indirect dividing attachment
2 x	Warding files set, 6pcs
1 x	Hot wire cutter THERMOCUT 230/E
1 x	MICROFLAM gas soldering set MGS
1 x	MICROMOT Mains Adapter NG 2/S
1 x	Side cutters 160mm
1 x	Round nose pliers 165mm
1 x	Side cutters 195mm
5 x	Magnetic base
1 x	Safety Insulated Phillips Screwdriver 14-632VDE
1 x	RT200 - Horizontal-vertical circular dividing table
1 x	Safety Insulated Phillips Screwdriver 14-633VDE
1 x	Telephone pliers straight 205mm
1 x	Combination pliers 190mm
1 x	Jig saw blades made of HSS
1 x	MICROMOT Mains Adapter NG 2/E
2 x	Insulation Resistance Tester MG500
2 x	Router base OFV
1 x	TIP SPT-9
1 x	RT150 - Horizontal-vertical circular dividing table
1 x	sanding belts for BBS/s Grit 150
1 x	6pcs Double Open End wrench set
1 x	RT100 - Horizontal-vertical circular dividing table
2 x	Chuck for TBM 220
1 x	Wire strippers 165mm
2 x	Cutting tool 10 mm
1 x	Safety insulated screwdrivers 14-606 VDE
2 x	Step clamps made of steel
1 x	Broca de alta duração de 1.5mm
1 x	Broca de alta duração de 2.1mm
1 x	Broca de alta duração de 1.2mm
2 x	lathe tools 10mm
1 x	Diamond-coated cutting disc for MIC
1 x	Cutting tool 16 mm
1 x	Blade holders for DS 460
1 x	machine base with shelves for D250X550
1 x	Centre Turning Attachment
1 x	Precision quick-action drill chuck 0-13mm B16
1 x	centrically clamping 125mm
1 x	Polishing Set
1 x	broca de alta duração de 0,6mm
1 x	Lathe tools 8mm pastilhados
1 x	Replacement belts for BSL 220/E
1 x	Broca de alta duração de 2.5mm
1 x	Diamond blade
1 x	Dividing attachment TA 230 for PF 250
1 x	Quick-action tool holder kit SWH AA
1 x	Broca de alta duração de 2.4mm
1 x	3-jaw chuck centrically clamping 125mm
1 x	Broca de alta duração de 0.8mm
1 x	Engraving tool GG
1 x	Broca de alta duração de 1.3mm
1 x	Coarse-toothed (10 TPI per 25mm)
1 x	Safety insulated screwdrivers 14-608 VDE
1 x	Precision steel vice PM 40
1 x	Saw blade made of high-alloy special steel
1 x	Tool holder type D for SWH 1-A
1 x	Tungsten carbide cutters set
1 x	Broca de alta duração de 0.3mm
1 x	Cutting tool 8 mm
1 x	Coarse-toothed blades (No. 5: 17 teeth per 25mm)
1 x	Coarse-toothed blades (No. 3: 34 teeth per 25mm)
1 x	Independent four jaw chuck for the DB 250
1 x	Coarse-toothed blades (No. 3: 41 teeth per 25mm)
1 x	Safety insulated screwdrivers 14-602 VDE
1 x	IC tweezers
1 x	PLCC Extractor
1 x	Follow rest for D250X550
2 x	Boring Bar for CCMT
1 x	Replacement glue sticks for HKP 220
1 x	Collet chuck ER32 for D250X550
1 x	Universal and oil siphoning pump AP 12
1 x	Tungsten tipped saw blade
1 x	Broca de alta duração de 1.1mm
1 x	Precision quick-action drill chuck 0-10mm B16
1 x	lathe tools 12mm
1 x	End mill for aluminium 4mm
1 x	Spiral blade. 125mm long with plain ends (without pins).
2 x	Morse taper MT2 - B16
1 x	lathe tools 8mm
1 x	Tool holder type H for SWH 1-A
1 x	Broca de alta duração de 0.4mm
1 x	Face clamping disc for D250X550
1 x	Broca de alta duração de 0.5mm
1 x	End mill for aluminium 3mm
1 x	Steady rest for D250X550
1 x	Replacement cutting disc for MICRO cutter MIC
1 x	Flap Wheels
1 x	Broca de alta duração de 1.4mm
1 x	Broca de alta duração de 0.7mm
1 x	MICRO Screwdriver MIS 1. Complete with 16 inserts.
1 x	Safety insulated screwdrivers 14-603 VDE
1 x	Cutting tool HM 20 mm
2 x	Parting tool 10mm
1 x	Broca de alta duração de 1.0mm
2 x	Boring Bar for CCMT 8mm
1 x	Safety insulated screwdrivers 14-601 VDE
1 x	Three-jaw steel drill chuck
1 x	Boring Bar for DCMT 10mm
1 x	Coarse-toothed blades (No. 5: 36 teeth per 25mm)
1 x	Microfibre polishing wheel, 15-ply (100mm)
1 x	Broca de alta duração de 0.9mm
1 x	Coarse-toothed (25 TPI per 25mm)
1 x	Coarse-toothed blades (No. 1: 50 teeth per 25mm)
2 x	SCLCR1010E06
1 x	Solid carbide saw blade
2 x	Lathe tools 10mm pastilhados
1 x	Silicon-Carbide.
1 x	Safety insulated screwdrivers 14-604 VDE
1 x	Machine Vice MS 4
1 x	sclcr2525M12
1 x	Broca de alta duração de 2.2mm
1 x	End mill for aluminium 6mm
1 x	broca de alta duração de 0,2mm
1 x	Collet chuck ER25 for D250X550
1 x	Pensander PS 13
1 x	Special Fused Alumina (Hardness N).
1 x	4-jaw chuck individually clamping 125mm
1 x	Coarse-toothed (18 TPI per 25mm)
1 x	Broca de alta duração de 2.3mm
1 x	Crosscut 'Super-Cut' blade
1 x	replacement glass fibre for 2-166 Ø 4mm (PU 10)
1 x	Coarse-toothed blades (No. 9: 14 teeth per 25mm)
1 x	Broca de alta duração de 2.0mm
1 x	Boring Bar for CCMT 16mm
1 x	Compact workshop vacuum cleaner CW-matic
1 x	Three jaw chuck for the lathe DB 250
1 x
1 x	Treated muslin polishing wheel, stiff (100 x 15mm)
1 x	Super-fine sanding discs grain 2000
1 x	Angle cutter 45 °
1 x	Slot cutter 5.0mm
1 x	Microfibre cloth
1 x	CM2 - B16 - M10
1 x	BeeHive204
1 x	Half round cutter 13mm
1 x	V-slot cutter 6.5mm
1 x	Core box bit 3.2mm
1 x	STRIPPING TOOL WITH ADJUSTABLE KNIVES
1 x	ESD Tweezers For The SMD-Technique - 6 Piece Set
1 x	Rebating cutter 6.4mm
1 x	10-piece wood router cutter set
1 x	Handy 1515
1 x	Rounding over cutter 6.4mm
1 x	Professional polishing sponge
1 x	BeeHive208S
1 x	Inspector mirror
1 x	Backing disc for LWS
1 x	Morse taper MT3 - B16
1 x	Slot cutter 3.2mm
1 x	Professional set for finish grinding and polishing
1 x	Inpection mirror 1-978
1 x	Edge cutter with pin 6.4mm
1 x	Insulation Resistance Tester MG125

€21,703.54