€2,950.00 + VAT

BeeHive204
[60-0053]

BeeHive204

BeeHive204

Extremely fast universal 4x 48-pindrive concurrent production programmer (multiprogramming system).

 
Short description:

  • supported devices from manufacturers by 2.76 version of SW (27. Jan. 2011)
  • four independent universal programming modules (BeeProg2 based) in one unit
  • two BeeHive204 multiprogrammers can be attached to one PC to better utilize programming workplace
  • extremely fast programming, one of the fastest programmers in this category. Programs 64Mbit NOR Flash memory less than 9 seconds and 1Gbit NAND Flash less than 70 sec.
  • powerful independent pin driver circuit for each and every pin of the programmer
  • in-circuit programming capability through ISP connector
  • Very low voltage support for latest Flash memory chips
  • ESD protection on each pin of the sockets
  • USB (up to 480 Mbit/s) interface to PC
  • comfortable and easy to use control program, Windows 98/Me/NT/2000/XP/2003/XPx64/Vista/7 compatible
  • unique quick reaction to customer's needs - software update can be ready within a day from request by OnDemand software
  • approved by CE laboratory to meet CE requirements
  • made in Slovakia
  • warranty - 3 years

Please see the full information in http://www.elnec.com/products/production-programmers/beehive204/

Reviews
Manufacturers
1 x BGA-Bottom-20
1 x BGA-Bottom-125
1 x Broca de alta duração de 0.8mm
1 x Grinding mop cylinder grit 120
3 x Edge cutter with pin 6.4mm
2 x BGA-0245/0242
3 x Flat nose pliers 185mm
1 x Super-fine sanding discs grain 400
2 x Core box bit 3.2mm
1 x Footswitch FS
1 x BGA-Bottom-212
2 x Collet chuck ER25 for D250X550
1 x V-slot cutter 6.5mm
1 x Lathe chuck flange for D250X550
1 x 6-piece screwdriver set ESD
1 x Replacement belts for BSL 220/E
1 x Combi cutter 6.5/2.5mm
1 x Morse taper MT2 - B16
1 x Slot cutter 3.2mm
1 x Professional Drill/Grinder IBS/E
2 x Telephone pliers stright 205mm
3 x Rebating cutter 6.4mm
1 x Polishing felt, medium hard
1 x Inspector mirror
1 x BGA-Bottom-166
1 x Combination pliers 170mm
1 x Three piece thread cutting set
1 x Broca de alta duração de 2.5mm
1 x Telephone pliers stright 165mm
1 x Four Jaw Chuck
1 x Coarse-toothed blades (No. 1: 50 teeth per 25mm)
1 x Inpection mirror 1-978
2 x Wire strippers 160mm
1 x sanding belts for BBS/s Grit 150
1 x MICRO Band Saw MBS 240/E
1 x BGA-Bottom-154
1 x Broca de alta duração de 2.0mm
1 x Combination pliers 185mm
1 x Broca de alta duração de 0.9mm
1 x Tool holder for rotary tools
1 x BGA-Bottom-191
1 x BGA-Bottom-157
2 x lathe tools 10mm
1 x Warding files set, 6pcs
1 x Grinding mop cylinder grit 240
1 x DIL28/PLCC84 ZIF HS538ESC01H
1 x Fixed Steady
1 x Coarse-toothed blades (No. 5: 17 teeth per 25mm)
2 x DIL32/PLCC32 ZIF
1 x DIL48/TSOP56 ZIF 18.4mm Flash-1
1 x DIL20W/SOIC20 ZIF 300mil
1 x 10-piece wood router cutter set
1 x DIL48/TSOP56 ZIF 18.4mm NOR-4
1 x Slot cutter 5.0mm
1 x DIL8/SSOP8 ZIF 120mil
1 x BGA-Bottom-103
1 x BGA-Bottom-8
1 x Coarse-toothed blades (No. 9: 14 teeth per 25mm)
1 x DIL20/SOIC20 ZIF 300 mil
1 x Rounding over cutter 6.4mm
1 x DIL8/SOIC8 ZIF 200mil
2 x Coarse-toothed blades (No. 5: 36 teeth per 25mm)
1 x DIL8W/SOIC8 ZIF 200mil
1 x Tungsten carbide cutters set
1 x BGA-0245/0241
1 x Coarse-toothed (18 TPI per 25mm)
1 x Centre Turning Attachment
1 x Slot cutter 6.5mm
1 x Round nose pliers 185mm
1 x Gear Chuck
1 x Collet Set for accurate use on round components
2 x Coarse-toothed blades (No. 3: 41 teeth per 25mm)
1 x BGA-Top-3 ZIF-CS
1 x DIL28W/SOIC28 ZIF 300mil
1 x DIL28/QFN28-2 ZIF-CS
1 x MICRO Miller FF 500
1 x BGA-Bottom-218
1 x Replacement belts for BSL 220/E
1 x Sanding pads for OZI 220/E grit 80
1 x ROTARY COAXIAL CABLE STRIPPER 3-STEPS
1 x Precision quick-action drill chuck 0-13mm B16
2 x ESD Tweezers 5-193
1 x MICRO-screwdrivers
1 x Replacement carving blades for MSG
1 x High quality corundum grinding bits
1 x High quality corundum grinding bits
1 x Top PSOP44 ZIF 600mil
1 x Bench drill machine TBM 220
1 x Safety Insulated Phillips Screwdriver 14-633VDE
1 x DIL24/QSOP24 ZIF 150mil
1 x DIL48/TSOP48 ZIF 18.4mm
1 x DIL40/TSOP40 ZIF-CS 12.4mm
1 x Bottom PSOP44 NOR-1
1 x Coarse-toothed (10 TPI per 25mm)
1 x Angle cutter 45 °
1 x DIL8/SOIC8 ZIF MB95-1
1 x DIL48/TSOP56 ZIF 18.4mm Flash-6
€9,346.69
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
We Accept
Manufacturer Info
Elnec
Elnec Homepage
Other products
Languages
Portugues English
Share Product
Share on Facebook