€7.30 + VAT

FREEZER-TOP 200ml
[1301412]

FREEZER-TOP 200ml

Quickly Tracks Thermal Intermittents, Cools Down to -50° C.

  • FREEZER-TOP is CFC-free.
  • It ensures reliable cooling down to -50° C.
  • It quickly locates thermal intermittent components due to heat induces failure.
  • The product is chemically pure, nonflammable and evaporates immediately without leaving residue.

Application:

  • Low temperature testing of electronic systems and heat-sensitive components such as ICs, transistors, diodes, resistors, capacitors and other defective components.
  • Also suitable for heat sink protection of electronic components during soldering or desoldering.
  • Low temperature testing of electromechanical systems and electronic circuits.
  • Location of hairline cracks in printed circuit boards.

Technical Data:

 

Density: 1.08 g / cm³
Evaporation: complete
Temperature obtained:  -50° C
Flash point: none
ODP: 0.00
Reviews

Customers who bought this product also purchased
BeeProg2
BeeProg2
Manufacturers
1 x Router base OFV
1 x HSS drill bits 1.2mm
1 x Protective device for hand-operated MICROMOT
1 x Flexishaft MICROMOT 110/P
2 x ROTARY COAXIAL CABLE STRIPPER 3-STEPS
1 x HSS drill bits 0.8mm
1 x Felt cloth polishing disc (100 x 15mm)
1 x Micro Compound Table KT 70
1 x Silicon-Carbide.
2 x Polishing Set
1 x Aluminium Die-Cast
1 x Saw blade made of high-alloy special steel
1 x Brass contact cleaner brush
1 x sanding belts for BBS/s Grit 150
1 x Footswitch FS
1 x Independent four jaw chuck for the DB 250
2 x Three-jaw steel drill chuck
1 x Flap Wheels
2 x Crimping plier for BNC
1 x IC tweezers
1 x Drill chuck with sliding sleeve for the tailstock
1 x Hand Magnifier 2-293
1 x MICRO Screwdriver MIS 1. Complete with 16 inserts.
1 x Glass fibre contact cleaner brush
1 x Hot wire cutter THERMOCUT 12/E
1 x Corundum fan sander for LWS
1 x Grinding mop cylinder grit 120
1 x Grinding mop cylinder grit 240
1 x HSS drill bits 1.0mm
1 x MICROMOT steel collet set
1 x HSS 1,065 x 6 x 0.6mm Dentado variável 10-14 TPI
1 x Broca de ponto 3.15 x 1.25
1 x Mill/Drill Unit BFB 2000.
1 x HSS twist drill set with centring pin
1 x Tungsten carbide drills Ø1,5mm
1 x Step clamps made of steel
2 x Three jaw chuck for the lathe DB 250
1 x Tungsten tipped saw blade
1 x magnetic base 80kg
1 x 14-piece parallel supports set
1 x HSS drill bits 1.6mm
1 x Grinding mop cylinder grit 80
1 x HSS drill bits 0.5mm
1 x Tungsten carbide drills Ø1mm
1 x IC Test clip 20 pins
1 x magnifier 3.25 x Ø 45mm with additional lens
1 x Conjunto de três brocas de ponto
1 x Crosscut 'Super-Cut' blade
1 x Replacement glue sticks for HKP 220
1 x TORQUE-SCREWDRIVER 0.5 - 1.5 Nm
1 x Hot wire cutter THERMOCUT 230/E
1 x BIT-SET
1 x Hand magnifier with LED light 3X
1 x Pinça SOIC de 8 pinos
1 x Glass fibre contact cleaner brush
1 x Engraving tool GG
1 x Insert CCGT060202-AK
1 x Insulation Resistance Tester MG500
1 x Diamond blade
1 x 
2 x Hot wire cutter THERMOCUT 650
1 x Tungsten carbide drills Ø2mm
1 x SCLCR1010E06
1 x Insulation Resistance Tester MG125
1 x Long neck angle milling/drilling unit LWB 220/E
1 x Precision lathe PD 250/E
2 x Cutting tools of high quality cobalt HSS steel, ground
1 x Digital caliper gauge 300 mm
1 x Grinding and Polishing Machine SP/E
2 x Multipurpose Vices Primus100
1 x Precision Drill/Grinder FBS 240/E
1 x MICROMOT 50/EF
1 x Precision steel vice PM 40
1 x STRIPPING TOOL WITH ADJUSTABLE KNIVES
1 x Cutting tools of high quality cobalt HSS steel, ground
1 x Disc Sander TG 125/E
1 x HSS boring tool set, 6 pieces
1 x Mill/Drill System BFW 40/E
1 x Three piece thread cutting set
1 x MICROMOT 50/E
1 x Lathe System PD 400
1 x Belt sander BS/E
1 x MICROMOT 50
1 x FLUX DISPENSING PEN, LEAD FREE
1 x Cylinder sander WAS/E
1 x Magnetic base
1 x Machine Vice MS 4
1 x Long neck straight drill/grinder LB/E
€7,040.99
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
We Accept
Manufacturer Info
CRAMOLIN
CRAMOLIN Homepage
Other products
Languages
Portugues English
Share Product
Share on Facebook