1 x | HSS boring tool set, 6 pieces |
2 x | Cylinder sander WAS/E |
3 x | Self-adhesive white corundum sanding discs for TG 125/E |
2 x | Corundum fan sander for LWS |
1 x | Sanding fleece for LWS |
1 x | Diamond Grinding Bits 1,8mm |
2 x | Blade holders for DS 460 |
3 x | MICRO-screwdrivers |
2 x | Replacement belts for BSL 220/E |
2 x | Surface planer AH 80 |
3 x | Corundum bound cutting disc for LWS |
1 x | Quick-action tool holder kit SWH AA |
2 x | 2-speed scroll saw DSH |
1 x | Flexible silicon discs |
2 x | MICRO Heat gun MH 550 |
1 x | Corundum fan sander for LWS |
2 x | Lambswool polishing disc |
2 x | Collet chuck ER25 for D250X550 |
4 x | High quality corundum grinding bits |
1 x | High quality corundum grinding bits |
2 x | MICROMOT tool holder |
2 x | Felt polishers |
2 x | Microfibre cloth |
2 x | 10-piece wood router cutter set |
3 x | Self-adhesive white corundum sanding discs for TG 125/E |
4 x | Felt polishers |
1 x | MICRO Miller MF 70 |
4 x | Radius Cutting Attachment, complete with pointed tool |
2 x | MICROMOT 230/E |
1 x | Tool holder type H for SWH 1-A |
2 x | TORQUE-SCREWDRIVER 0.5 - 1.5 Nm |
5 x | Lathe System PD 400 |
2 x | Tungsten Carbide Tipped (TCT) |
3 x | Bandsaw blade of bimetal for MBS 240/E |
3 x | Corundum grinding disc for LWS |
1 x | Precision quick-action drill chuck 0-16mm B16 |
2 x | Milling cutter set (6 - 10mm) |
1 x | Replacement cutting wire for the THERMOCUT 12/E |
1 x | TU 2004V |
2 x | Cups brushes |
2 x | Cutting tools of high quality cobalt HSS steel, ground |
4 x | Cotton polishers |
3 x | Diamond Cutting Discs |
3 x | Screwdriver bit set. 49-piece. |
3 x | Step clamps made of steel |
2 x | Disc Sander TG 125/E |
3 x | Corundum sanding discs for LWS |
2 x | Blade guides separately |
2 x | Bench drill press TBH |
1 x | MICROFLAM gas soldering set MGS |
3 x | Super-fine sanding discs grain 400 |
2 x | Disc Sander TG 250/E |
1 x | V-slot cutter 6.5mm |
5 x | Mill/Drill System BFW 40/E |
4 x | Collet Set for accurate use on round components |
5 x | Independent four jaw chuck for the DB 250 |
1 x | Grinding and Polishing Machine SP/E |
1 x | Treated muslin polishing wheel, stiff (100 x 15mm) |
3 x | Cotton polishers |
2 x | Corundum grinding disc for LWS |
1 x | quantum revolving center CM2 |
4 x | 14-piece parallel supports set |
5 x | Four Jaw Chuck |
2 x | Lathe chuck flange for D250X550 |
4 x | Flexible silicon discs |
2 x | Precision quick-action drill chuck 0-10mm B16 |
3 x | Backing disc for LWS |
1 x | Diamond Grinding Bits 5mm |
2 x | Edge cutter with pin 6.4mm |
3 x | Fibre-Cut Discs |
2 x | Corundum sanding discs for LWS |
1 x | Self-adhesive white corundum sanding discs for TG 250/E |
4 x | Precision lathe PD 250/E |
2 x | Coarse-toothed blades (No. 5: 17 teeth per 25mm) |
2 x | Blade for Wood and Plastics |
1 x | Multipurpose Vices Primus100 |
4 x | Three jaw chuck for the lathe DB 250 |
4 x | MICROMOT Mains Adapter NG 2/E |
2 x | HSS twist drill set to DIN 338 |
3 x | Footswitch FS |
1 x | Self-adhesive white corundum sanding discs for TG 250/E |
2 x | Coarse-toothed blades (No. 3: 41 teeth per 25mm) |
1 x | Cylinder shaped milling cutters |
3 x | Fixed Steady |
1 x | Belt sander BS/E |
3 x | Coarse-toothed blades (No. 5: 36 teeth per 25mm) |
1 x | Cutting tool 10 mm |
2 x | Fibre-Cut Discs |
2 x | Slot cutter 5.0mm |
2 x | High quality corundum grinding bits |
2 x | Band knife of hardened spring band steel (without teeth) |
5 x | Flap Wheels |
1 x | 4-jaw chuck individually clamping 125mm |
1 x | Hot wire cutter THERMOCUT 650 |
1 x | Coarse-toothed (18 TPI per 25mm) |
2 x | Sanding fleece for LWS |
3 x | Super-fine sanding discs grain 000 |
4 x | Flexible polishing pad set |
3 x | Fibre-Cut Discs |
1 x | Self-adhesive silicone carbide sanding discs for TSG 250/E |
3 x | MICROMOT drill stand MB 200 |
3 x | Cutting tools of high quality cobalt HSS steel, ground |
1 x | Rasp plate with metal burrs made from wolfram carbide for LWS |
2 x | Microfibre polishing wheel, 15-ply (100mm) |
2 x | MICROMOT Mains Adapter NG 2/S |
3 x | sanding belts for BBS/s Grit 80 |
3 x | Super-fine sanding discs grain 2000 |
2 x | Bench drill machine TBM 220 |
2 x | MICRO shaper MP 400 |
2 x | Self-adhesive white corundum sanding discs for TG 125/E |
1 x | Rounding over cutter 6.4mm |
1 x | TU 2404 |
2 x | Felt cloth polishing disc (100 x 15mm) |
1 x | sandpaper for PS 13 Grot 180 |
2 x | Sanding bands 14x13mm |
1 x | Cylindrical cutters |
4 x | Aluminium Die-Cast |
2 x | HSS twist drill set with centring pin |
4 x | MICROMOT steel collet set |
1 x | Protective device for hand-operated MICROMOT |
3 x | Extra narrow bandsaw blade (3.5mm) for tight radii |
2 x | Replacement carving blades for MSG |
3 x | Diamond blade for MBS 240/E |
2 x | Cutting disc, with reinforcement |
1 x | 3-jaw chuck centrically clamping 125mm |
2 x | Machine Vice MS 4 |
1 x | Steel brushes |
3 x | Micro Compound Table KT 70 |
1 x | Wheels brushes |
1 x | Diamond cutting blade for OZI |
2 x | Diamond Grinding Bits 1,8mm |
2 x | Flexible silicon discs |
2 x | Universal and oil siphoning pump AP 12 |
1 x | MICROMOT 50/E |
2 x | Brass brushes |
1 x | HSS cutting blade for OZI |
1 x | Replacement belts for BSL 220/E |
1 x | Diamond Coated |
2 x | Table Saw FET |
2 x | Hot wire cutter THERMOCUT 12/E |
2 x | Face clamping disc for D250X550 |
2 x | Precision quick-action drill chuck 0-13mm B16 |
2 x | MICROMOT extension cord. 300cm. |
3 x | High quality corundum grinding bits |
1 x | Felt polishers |
2 x | HSS 1,065 x 6 x 0.6mm Dentado variável 10-14 TPI |
3 x | Replacement glue sticks for HKP 220 |
1 x | MICROMOT glue gun HKP 220 |
2 x | Professional polishing sponge |
3 x | High quality corundum grinding bits |
1 x | MICRO Miller FF 230 |
1 x | Coarse-toothed (25 TPI per 25mm) |
2 x | Diamond blade |
2 x | Supercut jig saw blades of special steel |
3 x | Three-jaw steel drill chuck |
2 x | Wolfram vanadium steel milling bits |
2 x | Centre Turning Attachment |
1 x | Half round cutter 13mm |
1 x | Diamond-coated cutting disc for MIC |
2 x | Coarse-toothed blades (No. 1: 50 teeth per 25mm) |
2 x | Pensander PS 13 |
2 x | Diamond Cutting Discs |
1 x | Precision quick-action drill chuck 0-10mm B16 |
2 x | Diamond Cutting Discs |
2 x | centrically clamping 125mm |
2 x | Solid carbide saw blade |
4 x | Flexishaft MICROMOT 110/BF |
1 x | Angle cutter 45 ° |
1 x | MICRO Miller FF 500 |
3 x | Gear Chuck |
3 x | Five piece HSS chisel set |
4 x | Mill/Drill Unit BFB 2000. |
1 x | Thicknesser DH 40 |
2 x | Follow rest for D250X550 |
1 x | sandpaper for PS 13 Grit 240 |
2 x | Coarse-toothed blades (No. 9: 14 teeth per 25mm) |
2 x | Conjunto de três brocas de ponto |
1 x | Ball shaped milling cutters |
1 x | MICRO woodturning lathe DB 250 |
4 x | High quality corundum grinding bits |
1 x | sandpaper for PS 13 Grit 400 |
1 x | Solid carbide stylus for engraving |
2 x | Replacement belts for BSL 220/E |
1 x | Crosscut 'Super-Cut' blade |
2 x | Milling cutter set (2 - 5mm) |
2 x | Coarse-toothed blades (No. 3: 34 teeth per 25mm) |
2 x | Diamond Grinding Bits 1mm |
2 x | High quality corundum grinding bits |
2 x | Cut off/mitre saw KGS 80 |
1 x | Steel wheels |
3 x | Flexible polishing pad set |
3 x | Fibre-Cut Discs |
1 x | Diamond-coated cutting and roughing disc |
2 x | Saw blade made of high-alloy special steel |
1 x | MICROFLAME burner MFB/E |
1 x | Router base OFV |
1 x | Self-adhesive white corundum sanding discs for TG 250/E |
2 x | BeeHive204 |
2 x | Flexishaft MICROMOT 110/P |
3 x | Tungsten carbide drills Ø1mm |
2 x | HSS drill bits 0.8mm |
1 x | Tool holder for rotary tools |
2 x | Precision magnetic gauge stand |
1 x | Fine dust paper filter for CW-matic |
3 x | HSS drill bits 1.0mm |
3 x | Special Fused Alumina (Hardness N). |
2 x | Digital caliper gauge 300 mm |
1 x | Jig saw blades made of HSS |
2 x | Precision caliper square |
4 x | Silicon-Carbide. |
1 x | Slot cutter 6.5mm |
2 x | Magnetic base |
1 x | Sanding Drums |
2 x | Felt polishers |
1 x | Dial gauge |
1 x | MICRO Screwdriver MIS 1. Complete with 16 inserts. |
3 x | Sanding Discs |
1 x | Diamond Cutting Discs |
1 x | Steel cups |
1 x | BeeHive208S |
2 x | Grinding mop cylinder grit 120 |
2 x | Tungsten carbide drills Ø1,5mm |
1 x | Spiral blade. 125mm long with plain ends (without pins). |
1 x | BeeProg2 |
1 x | SmartProg2 |
2 x | Polishing paste |
1 x | Sanding Drums |
1 x | Sanding bands 14x13mm |
1 x | Combi cutter 6.5/2.5mm |
2 x | High quality corundum grinding bits |
1 x | HSS drill bits 0.5mm |
2 x | Blade for Steel and brass |
3 x | Metal Cutting Blades |
1 x | Replacement belts for BSL 220/E |
2 x | Steel tape measure |
2 x | Cotton polishers |
1 x | Stainless steel brushes |
1 x | Slot cutter 3.2mm |
1 x | Core box bit 3.2mm |
2 x | Nylon Fleece Brushes |
1 x | Flap Wheels |
2 x | Diamond Twist Drills |
1 x | Rebating cutter 6.4mm |
3 x | Fluted filter for CW-matic |
1 x | Polishing felt, medium hard |
1 x | Sanding Drums |
1 x | Sanding Discs |
3 x | Polishing Set |
2 x | HSS drill bits 1.2mm |
2 x | Lever Dial Indicator |
1 x | Precision Vice FMS 75 |
1 x | HSS immersion saw blades for OZI |
1 x | Beeprog2C |
1 x | HSS immersion saw blades for OZI |
1 x | Dividing attachment TA 230 for PF 250 |
1 x | Precision caliper 500mm |
1 x | Coarse-toothed (10 TPI per 25mm) |
2 x | Drill chuck with sliding sleeve for the tailstock |
2 x | MICROMOT Mains Adapter NG 5/E |
1 x | Tweezer teflon-coated 5-107-9 |
1 x | Ball-shaped diamond coated 1.2mm |
1 x | Combination pliers 205mm |
1 x | Motor-driven carving device MSG |
1 x | Universal holder UHZ |
1 x | Side cutters 170mm |
1 x | SMD Tweezers 5-062 |
1 x | SMD Tweezers 5-051 |
2 x | FLUX DISPENSING PEN, LEAD FREE |
2 x | Telephone pliers stright 205mm |
1 x | Flat nose pliers 165mm |
1 x | sanding belts for BBS/s Grit 240 |
2 x | Telephone pliers bent 165mm |
1 x | Combination pliers 170mm |
2 x | Tungsten carbide cutters set |
1 x | Flat nose pliers 160mm |
2 x | Precision steel vice PM 40 |
1 x | Telephon pliers straight 160mm |
1 x | Wire strippers 165mm |
1 x | Multipurpose Vices Primus 75 |
1 x | Tungsten carbide cutter 3.0mm |
1 x | Combination pliers 185mm |
2 x | |
1 x | 6pcs Double Open End wrench set |
2 x | sanding belts for BBS/s Grit 150 |
1 x | Telephon pliers bent 160mm |
1 x | Telephone pliers bent 205mm |
1 x | SMD Tweezers 5-053 |
2 x | Round nose pliers 185mm |
1 x | Telephone pliers bent 205mm |
2 x | Flat nose pliers 185mm |
1 x | Screwdriver 3.0 |
1 x | Wolfram vanadium steel milling bits |
1 x | Screwdriver 2.5 |
2 x | Multiform grindstone |
1 x | Combination pliers 160mm |
1 x | Universal polishing paste |
1 x | Ball-shaped diamond coated 3.2mm |
1 x | Screwdriver 2.0 |
1 x | Side cutters 180mm |
1 x | MICRO Band Saw MBS 240/E |
1 x | Scroll saw DS 230/E |
1 x | SMD Tweezers 5-071 |
1 x | Combination pliers 185mm |
1 x | Tungsten tipped saw blade |
1 x | Morse taper MT2 - B16 |
1 x | 6-piece screwdriver and cross-recess set |
1 x | SMD Tweezers 5-058 |
1 x | Inspector mirror |
1 x | Screwdriver 3.0 |
1 x | Telephon pliers straight 200mm |
1 x | Telephone pliers straight 205mm |
1 x | Wire strippers 160mm |
1 x | Tweezer teflon-coated 5-021-9 |
1 x | Side cutters 160mm |
1 x | Wire strippers 165mm |
1 x | Screwdriver 1.0 |
1 x | Tweezer teflon-coated 5-117-9 |
1 x | Super safety and specialty bit set, 75-piece |
1 x | Side cutters 160mm |
1 x | Tungstein carbide rasp - and cutting disc |
1 x | Polishing machine PM 100 |
1 x | Compact workshop vacuum cleaner CW-matic |
1 x | Ball-shaped diamond coated 2.2mm |
1 x | 6-piece TORX-screwdriver-set |
1 x | Tungsten carbide cutter 1.0mm |
1 x | Telephone pliers stright 165mm |
1 x | Precision drill grinder FBS 12/EF |
1 x | SMD Tweezers 5-075 |
1 x | Grinding mop cylinder grit 80 |
1 x | Inpection mirror 1-978 |
|
€56,601.07 |