Top » Catalog » Drills » Drills Tungsténio » hss0.3 » Reviews

€4.99

Broca de alta duração de 0.3mm
[hss0.3]

There are currently no product reviews.

Categories

Band Saw Blades
Butane soldering iron->
carpentry tools->
Chips Extractor
Componentes de elétronica->
Contact cleaner brush
Crimping Tools
Drilling-milling machine->
Drills->
drill
Drills Tungsténio
Elecronic pliers->
Electronic Screwdrivers->
ESD Tools->
Inspection mirror
Insulation Resistance Tester
Lathes->
Magnifying->
Mesure tools
Micromot tools->
Programmers and acessories->
Safety insulated screwdrivers->
Safety Isulated Pliers->
Service case
Service Case->
Solder and Flux->
Soldering Iron and station
Sprays->
Torque Screwdriver
Tweezers->
Warding files

Manufacturers

Information

Shipping & Returns
Privacy Notice
Conditions of Use

Shopping Cart

2 x	Five piece HSS chisel set
2 x	Blade for Steel and brass
4 x	Precision caliper 500mm
3 x	Three-jaw steel drill chuck
3 x	Coarse-toothed blades (No. 5: 36 teeth per 25mm)
8 x	Coarse-toothed blades (No. 9: 14 teeth per 25mm)
2 x	Mini side cutters EUROline-Conductive
5 x	Insulation Resistance Tester MG500
2 x	Backing disc for LWS
1 x	Jig saw blades made of HSS
1 x	Lambswool polishing disc
2 x	Round nose pliers 45º EUROline-Conductive
3 x	Coarse-toothed blades (No. 5: 17 teeth per 25mm)
3 x	Magnetic base
1 x	Snipe nose pliers 45º EUROline-Conductive
1 x	Brass contact cleaner brush
5 x	Mini side cutters EUROline-Conductive
2 x	End side cutters EUROline-Conductive
3 x	Coarse-toothed blades (No. 1: 50 teeth per 25mm)
3 x	PLCC Extractor
2 x	Dial gauge
2 x	Flat nose pliers 45º EUROline-Conductive
1 x	Professional polishing sponge
2 x	Glass fibre contact cleaner brush
2 x	Snipe nose pliers 45º EUROline-Conductive
4 x	Insulation Resistance Tester MG125
2 x	Precision caliper square
2 x	Polishing felt, medium hard
1 x	Supercut jig saw blades of special steel
1 x	Wrench Keys 0.7
1 x	Fluted filter for CW-matic
2 x	Spiral blade. 125mm long with plain ends (without pins).
1 x	Super-fine sanding discs grain 400
3 x	Table Sawr TKS 315 E
2 x	IC tweezers
8 x	Coarse-toothed blades (No. 3: 34 teeth per 25mm)
1 x	Flexible silicon discs
2 x	Lever Dial Indicator
1 x	Corundum fan sander for LWS
2 x	Coarse-toothed (10 TPI per 25mm)
2 x	HSS 1,065 x 6 x 0.6mm Dentado variável 10-14 TPI
1 x	ESD-handling ser 9-361
1 x	Super-fine sanding discs grain 000
1 x	Precision magnetic gauge stand
1 x	Super-fine sanding discs grain 2000
1 x	Lathe tools 8mm pastilhados
1 x	Diamond-coated cutting disc for MIC
1 x	Professional set for finish grinding and polishing
3 x	magnetic base 80kg
2 x	Digital caliper gauge 300 mm
1 x	Coarse-toothed (25 TPI per 25mm)
2 x	Vacum SAA 901
1 x	lathe tools 10mm
1 x	Wrench Keys 1.5
3 x	Glass fibre contact cleaner brush
2 x	Blade holders for DS 460
4 x	replacement glass fibre for 2-166 Ø 4mm (PU 10)
3 x	Belt sander BBS/S
2 x	TORQUE-SCREWDRIVER 0.5 - 1.5 Nm
2 x	MICRO Screwdriver MIS 1. Complete with 16 inserts.
2 x	MICROMOT Mains Adapter NG 2/S
2 x	MICROFLAME burner MFB/E
4 x	MICRO Heat gun MH 550
2 x	Universal holder UHZ
2 x	Coarse-toothed blades (No. 3: 41 teeth per 25mm)
2 x	Three jaw chuck for the lathe DB 250
2 x	STRIPPING TOOL WITH ADJUSTABLE KNIVES
2 x	PLCC Puller
3 x	MICROFLAM gas soldering set MGS
1 x	TORQUE-SCREWDRIVER 1.5 - 4.0 Nm
1 x	Engraving tool GG
2 x	MICRO-screwdrivers
3 x	Precision lathe PD 250/E
2 x	Coarse-toothed (18 TPI per 25mm)
2 x	Router base OFV
2 x	BIT-SET
1 x	EUROline-Conductive set of pliers
2 x	Solid carbide saw blade
1 x	Grinding and Polishing Machine SP/E
2 x	Crimping plier for BNC
2 x	Disc Sander TG 125/E
3 x	Band knife of hardened spring band steel (without teeth)
3 x	Precision steel vice PM 40
2 x	Cups brushes
2 x	Crosscut 'Super-Cut' blade
1 x	HSS twist drill set to DIN 338
2 x	CRIMPING PLIERS/WIRE STRIPPER
1 x	Diamond Coated
1 x	Super-Cut
1 x	BeeHive208S
1 x	Fibre-Cut Discs
2 x	Flap Wheels
2 x	Machine Vice MS 4
2 x	Diamond blade
1 x	Angle polisher WP/E
1 x	Corundum grinding disc for LWS
2 x	Tungsten Carbide Tipped (TCT)
2 x	Delta sander OZI/E
1 x	Safety Insulated Phillips Screwdriver 14-631VDE
1 x	Flap Wheels
1 x	Compact workshop vacuum cleaner CW-matic
1 x	HSS drill bits 1.6mm
2 x	Cylinder sander WAS/E
2 x	Diamond blade for MBS 240/E
2 x	Long neck angle grinder LHW
1 x	Table Saw TKS 2500 SC
1 x	Disc cutters
1 x	Grinding mop cylinder grit 80
1 x	Conjunto de três brocas de ponto
1 x	Diamond Cutting Discs
1 x	IC Test clip 20 pins
1 x	Flexible silicon discs
1 x	Tungsten carbide drills Ø1mm
1 x	Stainless steel cups
2 x	HSS boring tool set, 6 pieces
2 x	Disc Sander TG 250/E
1 x	Fibre-Cut Discs
1 x	Grinding mop cylinder grit 120
2 x	Multipurpose Vices Primus100
1 x	Four Jaw Chuck
1 x	Precision Vice FMZ
1 x	Diamond Grinding Bits 1,8mm
1 x	Polishing machine PM 100
2 x	Complete Engraving Kit with trial glass
1 x	Felt polishers
1 x	Mill/Drill System BFW 40/E
3 x	Cutting tools of high quality cobalt HSS steel, ground
1 x	Corundum sanding discs for LWS
1 x	Felt polishers
1 x	High quality corundum grinding bits
1 x	EUROline flat nose pliers
2 x	Multipurpose Vices Primus 75
1 x	Felt polishers
1 x	Tool holder for rotary tools
1 x	PROLUB 200ml
1 x	EUROline mini side cutter
1 x	Sanding bands 14x13mm
1 x	EUROline round nose pliers
3 x	Wood Lathe DB900
1 x	6-piece TORX-screwdriver-set ESD
1 x	Edge cutter with pin 6.4mm
1 x	High quality corundum grinding bits
1 x	Wolfram vanadium steel milling bits
1 x	Lathe System PD 400
2 x	EUROline end cutter
1 x	Aluminium Die-Cast
1 x	Corundum sanding discs for LWS
1 x	Blade guides separately
1 x	Radius Cutting Attachment, complete with pointed tool
1 x	Broca de ponto 3.15 x 1.25
1 x	Steel wheels
1 x	Sanding bands 14x13mm
1 x	Ball-shaped diamond coated 2.2mm
1 x	EUROline mini side cutter
1 x	sanding belts for BBS/s Grit 80
1 x	2-speed scroll saw DSH
1 x	Nylon Fleece Brushes
1 x	Extra narrow bandsaw blade (3.5mm) for tight radii
1 x	Collet Set for accurate use on round components
1 x	Universal and oil siphoning pump AP 12
1 x	6-piece screwdriver and cross-recess set ESD
1 x	High quality corundum grinding bits
1 x	Tungsten carbide cutter 3.0mm
1 x	Tungsten tipped saw blade
1 x	6-piece socket wrenches ESD
1 x	Step clamps made of steel
1 x	Wood Lathe DB450
1 x	Fibre-Cut Discs
1 x	EUROline snipe nose pliers
1 x	EUROline set of pliers
1 x	EUROline top cutter
1 x	Fixed Steady
1 x	Diamond Cutting Discs
1 x	surface planing and thicknessing ADH 250
1 x	Broca de alta duração de 2.8mm

€31,928.34