Top » Catalog » Cart Contents

What's In My Cart?

Product(s)

sandpaper for PS 13 Grot 180 sandpaper for PS 13 Grot 180

   or remove
€5.28
MICROMOT Mains Adapter NG 5/E MICROMOT Mains Adapter NG 5/E

   or remove
€56.00
Slot cutter 6.5mm Slot cutter 6.5mm

   or remove
€4.06
Replacement glue sticks for HKP 220 Replacement glue sticks for HKP 220

   or remove
€3.26
Edge cutter with pin 6.4mm Edge cutter with pin 6.4mm

   or remove
€4.06
Diamond-coated cutting disc for MIC Diamond-coated cutting disc for MIC

   or remove
€12.19
Rounding over cutter 6.4mm Rounding over cutter 6.4mm

   or remove
€4.06
Slot cutter 3.2mm Slot cutter 3.2mm

   or remove
€4.06
sandpaper for PS 13 Grit 240 sandpaper for PS 13 Grit 240

   or remove
€5.28
MICROMOT Mains Adapter NG 2/S MICROMOT Mains Adapter NG 2/S

   or remove
€23.17
MICROMOT steel collet set MICROMOT steel collet set

   or remove
€8.53
MICROMOT extension cord. 300cm. MICROMOT extension cord. 300cm.

   or remove
€6.50
Footswitch FS Footswitch FS

   or remove
€15.85
Angle cutter 45 ° Angle cutter 45 °

   or remove
€4.06
Self-adhesive white corundum sanding discs for TG 250/E Self-adhesive white corundum sanding discs for TG 250/E

   or remove
€10.16
Aluminium Die-Cast Aluminium Die-Cast

   or remove
€176.80
10-piece wood router cutter set 10-piece wood router cutter set

   or remove
€28.00
Fluted filter for CW-matic Fluted filter for CW-matic

   or remove
€15.04
Slot cutter 5.0mm Slot cutter 5.0mm

   or remove
€4.06
Coarse-toothed blades (No. 5: 17 teeth per 25mm) Coarse-toothed blades (No. 5: 17 teeth per 25mm)

   or remove
€7.30
Self-adhesive silicone carbide sanding discs for TSG 250/E Self-adhesive silicone carbide sanding discs for TSG 250/E

   or remove
€10.16
Coarse-toothed blades (No. 3: 41 teeth per 25mm) Coarse-toothed blades (No. 3: 41 teeth per 25mm)

   or remove
€4.45
MICROMOT tool holder MICROMOT tool holder

   or remove
€6.09
Micro Compound Table KT 70 Micro Compound Table KT 70

   or remove
€77.64
Self-adhesive white corundum sanding discs for TG 250/E Self-adhesive white corundum sanding discs for TG 250/E

   or remove
€10.16
V-slot cutter 6.5mm V-slot cutter 6.5mm

   or remove
€4.06
Coarse-toothed blades (No. 1: 50 teeth per 25mm) Coarse-toothed blades (No. 1: 50 teeth per 25mm)

   or remove
€4.45
Self-adhesive silicone film for easy sanding disc replacement Self-adhesive silicone film for easy sanding disc replacement

   or remove
€7.72
Flexishaft MICROMOT 110/P Flexishaft MICROMOT 110/P

   or remove
€28.04
Three-jaw steel drill chuck Three-jaw steel drill chuck

   or remove
€5.28
Mill/Drill Unit BFB 2000. Mill/Drill Unit BFB 2000.

   or remove
€172.76
Grinding mop cylinder grit 120 Grinding mop cylinder grit 120

   or remove
€8.33
Fine dust paper filter for CW-matic Fine dust paper filter for CW-matic

   or remove
€21.12
Flexishaft MICROMOT 110/BF Flexishaft MICROMOT 110/BF

   or remove
€26.82
Half round cutter 13mm Half round cutter 13mm

   or remove
€4.06
sandpaper for PS 13 Grit 400 sandpaper for PS 13 Grit 400

   or remove
€5.28
Sanding fleece for LWS Sanding fleece for LWS

   or remove
€6.09
Jig saw STS 12/E Jig saw STS 12/E

   or remove
€47.50
Corundum fan sander for LWS Corundum fan sander for LWS

   or remove
€4.45
Corundum fan sander for LWS Corundum fan sander for LWS

   or remove
€4.45
HSS cutting blade for OZI HSS cutting blade for OZI

   or remove
€17.00
Step clamps made of steel Step clamps made of steel

   or remove
€19.51
ROTARY COAXIAL CABLE STRIPPER 3-STEPS ROTARY COAXIAL CABLE STRIPPER 3-STEPS

   or remove
€14.30
HSS immersion saw blades for OZI HSS immersion saw blades for OZI

   or remove
€8.53
Corundum grinding disc for LWS Corundum grinding disc for LWS

   or remove
€2.84
Grinding and Polishing Machine SP/E Grinding and Polishing Machine SP/E

   or remove
€85.00
Drill chuck with sliding sleeve for the tailstock Drill chuck with sliding sleeve for the tailstock

   or remove
€11.78
Super-fine sanding discs grain 000 Super-fine sanding discs grain 000

   or remove
€3.82
Spiral blade. 125mm long with plain ends (without pins). Spiral blade. 125mm long with plain ends (without pins).

   or remove
€4.45
Compact workshop vacuum cleaner CW-matic Compact workshop vacuum cleaner CW-matic

   or remove
€172.75
Router base OFV Router base OFV

   or remove
€24.30
Precision caliper 500mm Precision caliper 500mm

   or remove
€249.50
PLCC Extractor PLCC Extractor

   or remove
€7.81
Super-fine sanding discs grain 400 Super-fine sanding discs grain 400

   or remove
€3.82
Cylinder sander WAS/E Cylinder sander WAS/E

   or remove
€119.92
Digital caliper gauge 300 mm Digital caliper gauge 300 mm

   or remove
€89.00
Super safety and specialty bit set, 75-piece Super safety and specialty bit set, 75-piece

   or remove
€46.18
Backing disc for LWS Backing disc for LWS

   or remove
€8.12
Silicon-Carbide. Silicon-Carbide.

   or remove
€3.25
Bench drill press TBH Bench drill press TBH

   or remove
€322.35
Long neck angle grinder LHW Long neck angle grinder LHW

   or remove
€96.75
Bench drill machine TBM 220 Bench drill machine TBM 220

   or remove
€163.41
TORQUE-SCREWDRIVER 1.5 - 4.0 Nm TORQUE-SCREWDRIVER 1.5 - 4.0 Nm

   or remove
€189.50
Dividing attachment TA 230 for PF 250 Dividing attachment TA 230 for PF 250

   or remove
€195.53
Insulation Resistance Tester MG500 Insulation Resistance Tester MG500

   or remove
€295.00
Coarse-toothed blades (No. 3: 34 teeth per 25mm) Coarse-toothed blades (No. 3: 34 teeth per 25mm)

   or remove
€3.65


   or remove
€4.87
Belt sander BS/E Belt sander BS/E

   or remove
€107.00
Dial gauge Dial gauge

   or remove
€17.90
Universal and oil siphoning pump AP 12 Universal and oil siphoning pump AP 12

   or remove
€49.50
Engraving tool GG Engraving tool GG

   or remove
€28.44
Steel tape measure Steel tape measure

   or remove
€3.50
Independent four jaw chuck for the DB 250 Independent four jaw chuck for the DB 250

   or remove
€26.00
Belt sander BBS/S Belt sander BBS/S

   or remove
€135.00
CRIMPING PLIERS/WIRE STRIPPER CRIMPING PLIERS/WIRE STRIPPER

   or remove
€5.95
MICROMOT 50/EF MICROMOT 50/EF

   or remove
€29.67
Magnetic base Magnetic base

   or remove
€65.00
Extra narrow bandsaw blade (3.5mm) for tight radii Extra narrow bandsaw blade (3.5mm) for tight radii

   or remove
€15.44
CRIMPING PLIERS FOR CONNECTOR TYPES HT-210C CRIMPING PLIERS FOR CONNECTOR TYPES HT-210C

   or remove
€15.30
Disc Sander TG 250/E Disc Sander TG 250/E

   or remove
€231.50
HSS 1,065 x 6 x 0.6mm Dentado variável 10-14 TPI HSS 1,065 x 6 x 0.6mm Dentado variável 10-14 TPI

   or remove
€21.90
Tungstein carbide rasp - and cutting disc Tungstein carbide rasp - and cutting disc

   or remove
€16.50
Coarse-toothed (10 TPI per 25mm) Coarse-toothed (10 TPI per 25mm)

   or remove
€5.28
sanding belts for BBS/s Grit 80 sanding belts for BBS/s Grit 80

   or remove
€6.09
Treated muslin polishing wheel, stiff (100 x 15mm) Treated muslin polishing wheel, stiff (100 x 15mm)

   or remove
€10.56
Sanding pads for OZI 220/E grit 240 Sanding pads for OZI 220/E grit 240

   or remove
€7.31
MICRO Miller FF 230 MICRO Miller FF 230

   or remove
€817.07
Microfibre polishing wheel, 15-ply (100mm) Microfibre polishing wheel, 15-ply (100mm)

   or remove
€11.38
Band knife of hardened spring band steel (without teeth) Band knife of hardened spring band steel (without teeth)

   or remove
€20.70
sanding belts for BBS/s Grit 150 sanding belts for BBS/s Grit 150

   or remove
€6.09
Professional polishing sponge Professional polishing sponge

   or remove
€6.42
Precision magnetic gauge stand Precision magnetic gauge stand

   or remove
€24.00
Replacement belts for BSL 220/E Replacement belts for BSL 220/E

   or remove
€3.25
MICRO Miller FF 500 MICRO Miller FF 500

   or remove
€1,820.73
Three jaw chuck for the lathe DB 250 Three jaw chuck for the lathe DB 250

   or remove
€42.27
Diamond cutting blade for OZI Diamond cutting blade for OZI

   or remove
€50.00
Super jig saw STS/E Super jig saw STS/E

   or remove
€91.00
Inpection mirror 1-978 Inpection mirror 1-978

   or remove
€11.88
Diamond blade for MBS 240/E Diamond blade for MBS 240/E

   or remove
€91.05
Sanding fleece for LWS Sanding fleece for LWS

   or remove
€6.09
Disc Sander TG 125/E Disc Sander TG 125/E

   or remove
€170.50
Screwdriver bit set. 49-piece. Screwdriver bit set. 49-piece.

   or remove
€46.00
Super-fine sanding discs grain 2000 Super-fine sanding discs grain 2000

   or remove
€3.82
Bench Circular Saw KS 230 Bench Circular Saw KS 230

   or remove
€115.50
Coarse-toothed blades (No. 9: 14 teeth per 25mm) Coarse-toothed blades (No. 9: 14 teeth per 25mm)

   or remove
€3.65
Pensander PS 13 Pensander PS 13

   or remove
€23.99
PLCC Puller PLCC Puller

   or remove
€4.51
Sanding pads for OZI 220/E grit 150 Sanding pads for OZI 220/E grit 150

   or remove
€7.31
Corundum bound cutting disc for LWS Corundum bound cutting disc for LWS

   or remove
€5.28
Centre Turning Attachment Centre Turning Attachment

   or remove
€77.20
Diamond-coated cutting and roughing disc Diamond-coated cutting and roughing disc

   or remove
€22.90
Thicknesser DH 40 Thicknesser DH 40

   or remove
€499.00
Bandsaw blade of bimetal for MBS 240/E Bandsaw blade of bimetal for MBS 240/E

   or remove
€23.98
Professional set for finish grinding and polishing Professional set for finish grinding and polishing

   or remove
€27.56
Blade for Wood and Plastics Blade for Wood and Plastics

   or remove
€13.00
Lever Dial Indicator Lever Dial Indicator

   or remove
€111.90
Long neck straight drill/grinder LB/E Long neck straight drill/grinder LB/E

   or remove
€89.02
Mill/Drill System BFW 40/E Mill/Drill System BFW 40/E

   or remove
€176.82
Hot wire cutter THERMOCUT 12/E Hot wire cutter THERMOCUT 12/E

   or remove
€34.50
MICROMOT 50/E MICROMOT 50/E

   or remove
€30.89

Sub-Total: €8,306.67

Checkout

Categories
Band Saw Blades
Butane soldering iron->
carpentry tools->
Chips Extractor
Componentes de elétronica->
Contact cleaner brush
Crimping Tools
Drilling-milling machine->
Drills->
Elecronic pliers->
Electronic Screwdrivers->
ESD Tools->
Inspection mirror
Insulation Resistance Tester
Lathes->
Magnifying->
Mesure tools
Micromot tools->
Programmers and acessories->
Safety insulated screwdrivers->
Safety Isulated Pliers->
Service case
Service Case->
Solder and Flux->
Soldering Iron and station
Sprays->
Torque Screwdriver
Tweezers->
Warding files
Manufacturers
Information
Shipping & Returns
Privacy Notice
Conditions of Use
Shopping Cart
1 x sandpaper for PS 13 Grot 180
1 x MICROMOT Mains Adapter NG 5/E
1 x Slot cutter 6.5mm
2 x Replacement glue sticks for HKP 220
1 x Edge cutter with pin 6.4mm
1 x Diamond-coated cutting disc for MIC
1 x Rounding over cutter 6.4mm
1 x Slot cutter 3.2mm
1 x sandpaper for PS 13 Grit 240
1 x MICROMOT Mains Adapter NG 2/S
1 x MICROMOT steel collet set
1 x MICROMOT extension cord. 300cm.
1 x Footswitch FS
1 x Angle cutter 45 °
1 x Self-adhesive white corundum sanding discs for TG 250/E
1 x Aluminium Die-Cast
1 x 10-piece wood router cutter set
1 x Fluted filter for CW-matic
1 x Slot cutter 5.0mm
2 x Coarse-toothed blades (No. 5: 17 teeth per 25mm)
1 x Self-adhesive silicone carbide sanding discs for TSG 250/E
1 x Coarse-toothed blades (No. 3: 41 teeth per 25mm)
1 x MICROMOT tool holder
1 x Micro Compound Table KT 70
1 x Self-adhesive white corundum sanding discs for TG 250/E
1 x V-slot cutter 6.5mm
1 x Coarse-toothed blades (No. 1: 50 teeth per 25mm)
1 x Self-adhesive silicone film for easy sanding disc replacement
1 x Flexishaft MICROMOT 110/P
1 x Three-jaw steel drill chuck
1 x Mill/Drill Unit BFB 2000.
1 x Grinding mop cylinder grit 120
2 x Fine dust paper filter for CW-matic
1 x Flexishaft MICROMOT 110/BF
1 x Half round cutter 13mm
1 x sandpaper for PS 13 Grit 400
1 x Sanding fleece for LWS
1 x Jig saw STS 12/E
1 x Corundum fan sander for LWS
1 x Corundum fan sander for LWS
1 x HSS cutting blade for OZI
1 x Step clamps made of steel
1 x ROTARY COAXIAL CABLE STRIPPER 3-STEPS
1 x HSS immersion saw blades for OZI
1 x Corundum grinding disc for LWS
1 x Grinding and Polishing Machine SP/E
1 x Drill chuck with sliding sleeve for the tailstock
1 x Super-fine sanding discs grain 000
1 x Spiral blade. 125mm long with plain ends (without pins).
1 x Compact workshop vacuum cleaner CW-matic
1 x Router base OFV
1 x Precision caliper 500mm
1 x PLCC Extractor
1 x Super-fine sanding discs grain 400
1 x Cylinder sander WAS/E
1 x Digital caliper gauge 300 mm
1 x Super safety and specialty bit set, 75-piece
2 x Backing disc for LWS
1 x Silicon-Carbide.
1 x Bench drill press TBH
1 x Long neck angle grinder LHW
1 x Bench drill machine TBM 220
1 x TORQUE-SCREWDRIVER 1.5 - 4.0 Nm
1 x Dividing attachment TA 230 for PF 250
1 x Insulation Resistance Tester MG500
1 x Coarse-toothed blades (No. 3: 34 teeth per 25mm)
1 x 
1 x Belt sander BS/E
1 x Dial gauge
1 x Universal and oil siphoning pump AP 12
2 x Engraving tool GG
1 x Steel tape measure
1 x Independent four jaw chuck for the DB 250
1 x Belt sander BBS/S
1 x CRIMPING PLIERS/WIRE STRIPPER
1 x MICROMOT 50/EF
1 x Magnetic base
1 x Extra narrow bandsaw blade (3.5mm) for tight radii
1 x CRIMPING PLIERS FOR CONNECTOR TYPES HT-210C
1 x Disc Sander TG 250/E
1 x HSS 1,065 x 6 x 0.6mm Dentado variável 10-14 TPI
1 x Tungstein carbide rasp - and cutting disc
1 x Coarse-toothed (10 TPI per 25mm)
1 x sanding belts for BBS/s Grit 80
2 x Treated muslin polishing wheel, stiff (100 x 15mm)
1 x Sanding pads for OZI 220/E grit 240
1 x MICRO Miller FF 230
1 x Microfibre polishing wheel, 15-ply (100mm)
1 x Band knife of hardened spring band steel (without teeth)
1 x sanding belts for BBS/s Grit 150
1 x Professional polishing sponge
1 x Precision magnetic gauge stand
1 x Replacement belts for BSL 220/E
1 x MICRO Miller FF 500
1 x Three jaw chuck for the lathe DB 250
1 x Diamond cutting blade for OZI
1 x Super jig saw STS/E
1 x Inpection mirror 1-978
1 x Diamond blade for MBS 240/E
1 x Sanding fleece for LWS
1 x Disc Sander TG 125/E
1 x Screwdriver bit set. 49-piece.
1 x Super-fine sanding discs grain 2000
1 x Bench Circular Saw KS 230
1 x Coarse-toothed blades (No. 9: 14 teeth per 25mm)
1 x Pensander PS 13
1 x PLCC Puller
1 x Sanding pads for OZI 220/E grit 150
1 x Corundum bound cutting disc for LWS
1 x Centre Turning Attachment
1 x Diamond-coated cutting and roughing disc
1 x Thicknesser DH 40
1 x Bandsaw blade of bimetal for MBS 240/E
1 x Professional set for finish grinding and polishing
1 x Blade for Wood and Plastics
1 x Lever Dial Indicator
1 x Long neck straight drill/grinder LB/E
1 x Mill/Drill System BFW 40/E
1 x Hot wire cutter THERMOCUT 12/E
1 x MICROMOT 50/E
€8,306.67
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
We Accept
What's New?
Grinding mop cylinder grit 80
Grinding mop cylinder grit 80
€8.33
Languages
Portugues English

Copyright © 2024 Oficina-digital.com
De acordo com a Lei nº 144/2015 informamos que em caso de litígio, o foro competente será o Centro de Arbitragem de Conflitos de Consumo de Lisboa.
Livro de Reclamações Online