Top » Catalog » Cart Contents

What's In My Cart?

Product(s)

BGA-Bottom-1 BGA-Bottom-1

   or remove
€85.00
Diamond Coated Diamond Coated

   or remove
€45.93
FLUX DISPENSING PEN, LEAD FREE FLUX DISPENSING PEN, LEAD FREE

   or remove
€49.26
Router base OFV Router base OFV

   or remove
€24.30
HSS 1,065 x 6 x 0.6mm Dentado variável 10-14 TPI HSS 1,065 x 6 x 0.6mm Dentado variável 10-14 TPI

   or remove
€21.90
Coarse-toothed (10 TPI per 25mm) Coarse-toothed (10 TPI per 25mm)

   or remove
€5.28
MICROMOT extension cord. 300cm. MICROMOT extension cord. 300cm.

   or remove
€6.50
Blade for Steel and brass Blade for Steel and brass

   or remove
€13.00
Fluted filter for CW-matic Fluted filter for CW-matic

   or remove
€30.08
Super-fine sanding discs grain 000 Super-fine sanding discs grain 000

   or remove
€7.64
Blade holders for DS 460 Blade holders for DS 460

   or remove
€14.20
Blade guides separately Blade guides separately

   or remove
€14.63
Multiform grindstone Multiform grindstone

   or remove
€21.12
Fine dust paper filter for CW-matic Fine dust paper filter for CW-matic

   or remove
€21.12
Dividing attachment TA 230 for PF 250 Dividing attachment TA 230 for PF 250

   or remove
€391.06
Super-Cut Super-Cut

   or remove
€13.41
Silicon-Carbide. Silicon-Carbide.

   or remove
€3.25
Replacement belts for BSL 220/E Replacement belts for BSL 220/E

   or remove
€3.25
Tungsten Carbide Tipped (TCT) Tungsten Carbide Tipped (TCT)

   or remove
€21.13
Flexishaft MICROMOT 110/BF Flexishaft MICROMOT 110/BF

   or remove
€26.82
Protective device for hand-operated MICROMOT Protective device for hand-operated MICROMOT

   or remove
€4.87
Extra narrow bandsaw blade (3.5mm) for tight radii Extra narrow bandsaw blade (3.5mm) for tight radii

   or remove
€15.44
Mill/Drill Unit BFB 2000. Mill/Drill Unit BFB 2000.

   or remove
€172.76
Replacement carving blades for MSG Replacement carving blades for MSG

   or remove
€31.70
Spiral blade. 125mm long with plain ends (without pins). Spiral blade. 125mm long with plain ends (without pins).

   or remove
€4.45
Bandsaw blade of bimetal for MBS 240/E Bandsaw blade of bimetal for MBS 240/E

   or remove
€23.98
MICRO Miller FF 230 MICRO Miller FF 230

   or remove
€1,634.14
MICROMOT steel collet set MICROMOT steel collet set

   or remove
€8.53
PLCC Puller PLCC Puller

   or remove
€4.51
MICROMOT tool holder MICROMOT tool holder

   or remove
€6.09
Footswitch FS Footswitch FS

   or remove
€15.85
Special Fused Alumina (Hardness N). Special Fused Alumina (Hardness N).

   or remove
€3.25
Aluminium Die-Cast Aluminium Die-Cast

   or remove
€353.60
Three-jaw steel drill chuck Three-jaw steel drill chuck

   or remove
€10.56
Polishing Set Polishing Set

   or remove
€21.13
Coarse-toothed blades (No. 1: 50 teeth per 25mm) Coarse-toothed blades (No. 1: 50 teeth per 25mm)

   or remove
€4.45
Plastic magnifying glass Plastic magnifying glass

   or remove
€6.49
Coarse-toothed blades (No. 3: 41 teeth per 25mm) Coarse-toothed blades (No. 3: 41 teeth per 25mm)

   or remove
€4.45
Coarse-toothed blades (No. 5: 17 teeth per 25mm) Coarse-toothed blades (No. 5: 17 teeth per 25mm)

   or remove
€3.65
OPTI BF16 Vario OPTI BF16 Vario

   or remove
€1,220.00
Coarse-toothed blades (No. 3: 34 teeth per 25mm) Coarse-toothed blades (No. 3: 34 teeth per 25mm)

   or remove
€3.65
Coarse-toothed blades (No. 9: 14 teeth per 25mm) Coarse-toothed blades (No. 9: 14 teeth per 25mm)

   or remove
€3.65
Cutter head for copy and surface milling MT2 Cutter head for copy and surface milling MT2

   or remove
€198.00
Flexible silicon discs Flexible silicon discs

   or remove
€6.09
Thicknesser DH 40 Thicknesser DH 40

   or remove
€499.00
Angle cutter 45 ° Angle cutter 45 °

   or remove
€4.06
Sanding pads for OZI 220/E grit 80 Sanding pads for OZI 220/E grit 80

   or remove
€7.31
sandpaper for PS 13 Grit 240 sandpaper for PS 13 Grit 240

   or remove
€5.28
Collet Set for accurate use on round components Collet Set for accurate use on round components

   or remove
€228.80
Corundum sanding discs for LWS Corundum sanding discs for LWS

   or remove
€3.65
MICRO Miller FF 500 MICRO Miller FF 500

   or remove
€1,820.73
Diamond-coated cutting disc for MIC Diamond-coated cutting disc for MIC

   or remove
€12.19
Chuck for TBM 220 Chuck for TBM 220

   or remove
€10.95
MICROMOT drill stand MB 200 MICROMOT drill stand MB 200

   or remove
€71.54
Micro Compound Table KT 70 Micro Compound Table KT 70

   or remove
€77.64
PVC-insulated tweezers 5-107-6 PVC-insulated tweezers 5-107-6

   or remove
€7.92
Diamond cutting blade for OZI Diamond cutting blade for OZI

   or remove
€50.00
Corundum sanding discs for LWS Corundum sanding discs for LWS

   or remove
€3.65
Slot cutter 5.0mm Slot cutter 5.0mm

   or remove
€4.06
Diamond Cutting Discs Diamond Cutting Discs

   or remove
€13.82
Hot wire cutter THERMOCUT 12/E Hot wire cutter THERMOCUT 12/E

   or remove
€34.50
Multipurpose Vices Primus 75 Multipurpose Vices Primus 75

   or remove
€46.74
Diamond-coated cutting and roughing disc Diamond-coated cutting and roughing disc

   or remove
€22.90
Grinding mop cylinder grit 120 Grinding mop cylinder grit 120

   or remove
€8.33
Angle polisher WP/E Angle polisher WP/E

   or remove
€109.00
Four Jaw Chuck Four Jaw Chuck

   or remove
€189.90

Sub-Total: €7,812.14

Checkout

Categories
Band Saw Blades
Butane soldering iron->
carpentry tools->
Chips Extractor
Componentes de elétronica->
Contact cleaner brush
Crimping Tools
Drilling-milling machine->
Drills->
Elecronic pliers->
Electronic Screwdrivers->
ESD Tools->
Inspection mirror
Insulation Resistance Tester
Lathes->
Magnifying->
Mesure tools
Micromot tools->
Programmers and acessories->
Safety insulated screwdrivers->
Safety Isulated Pliers->
Service case
Service Case->
Solder and Flux->
Soldering Iron and station
Sprays->
Torque Screwdriver
Tweezers->
Warding files
Manufacturers
Information
Shipping & Returns
Privacy Notice
Conditions of Use
Shopping Cart
1 x BGA-Bottom-1
1 x Diamond Coated
3 x FLUX DISPENSING PEN, LEAD FREE
1 x Router base OFV
1 x HSS 1,065 x 6 x 0.6mm Dentado variável 10-14 TPI
1 x Coarse-toothed (10 TPI per 25mm)
1 x MICROMOT extension cord. 300cm.
1 x Blade for Steel and brass
2 x Fluted filter for CW-matic
2 x Super-fine sanding discs grain 000
1 x Blade holders for DS 460
1 x Blade guides separately
2 x Multiform grindstone
2 x Fine dust paper filter for CW-matic
2 x Dividing attachment TA 230 for PF 250
1 x Super-Cut
1 x Silicon-Carbide.
1 x Replacement belts for BSL 220/E
1 x Tungsten Carbide Tipped (TCT)
1 x Flexishaft MICROMOT 110/BF
1 x Protective device for hand-operated MICROMOT
1 x Extra narrow bandsaw blade (3.5mm) for tight radii
1 x Mill/Drill Unit BFB 2000.
1 x Replacement carving blades for MSG
1 x Spiral blade. 125mm long with plain ends (without pins).
1 x Bandsaw blade of bimetal for MBS 240/E
2 x MICRO Miller FF 230
1 x MICROMOT steel collet set
1 x PLCC Puller
1 x MICROMOT tool holder
1 x Footswitch FS
1 x Special Fused Alumina (Hardness N).
2 x Aluminium Die-Cast
2 x Three-jaw steel drill chuck
1 x Polishing Set
1 x Coarse-toothed blades (No. 1: 50 teeth per 25mm)
1 x Plastic magnifying glass
1 x Coarse-toothed blades (No. 3: 41 teeth per 25mm)
1 x Coarse-toothed blades (No. 5: 17 teeth per 25mm)
1 x OPTI BF16 Vario
1 x Coarse-toothed blades (No. 3: 34 teeth per 25mm)
1 x Coarse-toothed blades (No. 9: 14 teeth per 25mm)
1 x Cutter head for copy and surface milling MT2
1 x Flexible silicon discs
1 x Thicknesser DH 40
1 x Angle cutter 45 °
1 x Sanding pads for OZI 220/E grit 80
1 x sandpaper for PS 13 Grit 240
1 x Collet Set for accurate use on round components
1 x Corundum sanding discs for LWS
1 x MICRO Miller FF 500
1 x Diamond-coated cutting disc for MIC
1 x Chuck for TBM 220
1 x MICROMOT drill stand MB 200
1 x Micro Compound Table KT 70
1 x PVC-insulated tweezers 5-107-6
1 x Diamond cutting blade for OZI
1 x Corundum sanding discs for LWS
1 x Slot cutter 5.0mm
1 x Diamond Cutting Discs
1 x Hot wire cutter THERMOCUT 12/E
1 x Multipurpose Vices Primus 75
1 x Diamond-coated cutting and roughing disc
1 x Grinding mop cylinder grit 120
1 x Angle polisher WP/E
1 x Four Jaw Chuck
€7,812.14
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
We Accept
What's New?
Grinding mop cylinder grit 120
Grinding mop cylinder grit 120
€8.33
Languages
Portugues English

Copyright © 2024 Oficina-digital.com
De acordo com a Lei nº 144/2015 informamos que em caso de litígio, o foro competente será o Centro de Arbitragem de Conflitos de Consumo de Lisboa.
Livro de Reclamações Online