Top » Catalog » Cart Contents

What's In My Cart?

Product(s)

4-jaw chuck individually clamping 125mm 4-jaw chuck individually clamping 125mm

   or remove
€133.00
Solid carbide saw blade Solid carbide saw blade

   or remove
€66.66
HSS drill bits 1.0mm HSS drill bits 1.0mm

   or remove
€4.06
Super-fine sanding discs grain 000 Super-fine sanding discs grain 000

   or remove
€3.82
Three jaw chuck for the lathe DB 250 Three jaw chuck for the lathe DB 250

   or remove
€42.27
Diamond Twist Drills Diamond Twist Drills

   or remove
€7.72
Professional polishing sponge Professional polishing sponge

   or remove
€6.42
Sanding pads for OZI 220/E grit 150 Sanding pads for OZI 220/E grit 150

   or remove
€7.31
HSS cutting blade for OZI HSS cutting blade for OZI

   or remove
€34.00
Collet Set for accurate use on round components Collet Set for accurate use on round components

   or remove
€228.80
Quick-action tool holder kit SWH AA Quick-action tool holder kit SWH AA

   or remove
€429.00
Sanding Discs Sanding Discs

   or remove
€3.25
Morse taper MT2 - B16 Morse taper MT2 - B16

   or remove
€7.50
Grinding mop cylinder grit 120 Grinding mop cylinder grit 120

   or remove
€8.33
Sanding pads for OZI 220/E grit 240 Sanding pads for OZI 220/E grit 240

   or remove
€14.62
Replacement cutting disc for MICRO cutter MIC Replacement cutting disc for MICRO cutter MIC

   or remove
€7.72
Band knife of hardened spring band steel (without teeth) Band knife of hardened spring band steel (without teeth)

   or remove
€20.70
Treated muslin polishing wheel, stiff (100 x 15mm) Treated muslin polishing wheel, stiff (100 x 15mm)

   or remove
€10.56
TU 1503V TU 1503V

   or remove
€999.00
quantum revolving center CM2 quantum revolving center CM2

   or remove
€55.00
Pensander PS 13 Pensander PS 13

   or remove
€23.99
End mill for aluminium 4mm End mill for aluminium 4mm

   or remove
€15.80
Tungsten carbide cutters set Tungsten carbide cutters set

   or remove
€43.90
MICRO Miller FF 230 MICRO Miller FF 230

   or remove
€817.07
Nylon Fleece Brushes Nylon Fleece Brushes

   or remove
€4.47
Grinding mop cylinder grit 240 Grinding mop cylinder grit 240

   or remove
€8.33
Grinding mop cylinder grit 120 Grinding mop cylinder grit 120

   or remove
€8.33
Three-jaw steel drill chuck Three-jaw steel drill chuck

   or remove
€5.28
14-piece parallel supports set 14-piece parallel supports set

   or remove
€91.86
Steady rest for D250X550 Steady rest for D250X550

   or remove
€51.50
Micro Compound Table KT 70 Micro Compound Table KT 70

   or remove
€77.64
Hot wire cutter THERMOCUT 650 Hot wire cutter THERMOCUT 650

   or remove
€79.50
Coarse-toothed blades (No. 5: 17 teeth per 25mm) Coarse-toothed blades (No. 5: 17 teeth per 25mm)

   or remove
€3.65
Silicon-Carbide. Silicon-Carbide.

   or remove
€3.25
Radius Cutting Attachment, complete with pointed tool Radius Cutting Attachment, complete with pointed tool

   or remove
€61.36
Crosscut 'Super-Cut' blade Crosscut 'Super-Cut' blade

   or remove
€9.75
MICROMOT Mains Adapter NG 2/S MICROMOT Mains Adapter NG 2/S

   or remove
€23.17
Coarse-toothed blades (No. 5: 36 teeth per 25mm) Coarse-toothed blades (No. 5: 36 teeth per 25mm)

   or remove
€4.45
Cutting disc, with reinforcement Cutting disc, with reinforcement

   or remove
€2.44
Coarse-toothed blades (No. 3: 34 teeth per 25mm) Coarse-toothed blades (No. 3: 34 teeth per 25mm)

   or remove
€3.65
Diamond Cutting Discs Diamond Cutting Discs

   or remove
€10.16
Independent four jaw chuck for the DB 250 Independent four jaw chuck for the DB 250

   or remove
€26.00
Bandsaw blade of bimetal for MBS 240/E Bandsaw blade of bimetal for MBS 240/E

   or remove
€23.98
Five piece HSS chisel set Five piece HSS chisel set

   or remove
€33.73
Super-fine sanding discs grain 400 Super-fine sanding discs grain 400

   or remove
€3.82
HSS 1,065 x 6 x 0.6mm Dentado variável 10-14 TPI HSS 1,065 x 6 x 0.6mm Dentado variável 10-14 TPI

   or remove
€21.90
Special Fused Alumina (Hardness N). Special Fused Alumina (Hardness N).

   or remove
€3.25
End milling cutter kit HSS 20 pcs End milling cutter kit HSS 20 pcs

   or remove
€140.50

Sub-Total: €3,692.47

Checkout

Categories
Band Saw Blades
Butane soldering iron->
carpentry tools->
Chips Extractor
Componentes de elétronica->
Contact cleaner brush
Crimping Tools
Drilling-milling machine->
Drills->
Elecronic pliers->
Electronic Screwdrivers->
ESD Tools->
Inspection mirror
Insulation Resistance Tester
Lathes->
Magnifying->
Mesure tools
Micromot tools->
Programmers and acessories->
Safety insulated screwdrivers->
Safety Isulated Pliers->
Service case
Service Case->
Solder and Flux->
Soldering Iron and station
Sprays->
Torque Screwdriver
Tweezers->
Warding files
Manufacturers
Information
Shipping & Returns
Privacy Notice
Conditions of Use
Shopping Cart
1 x 4-jaw chuck individually clamping 125mm
2 x Solid carbide saw blade
1 x HSS drill bits 1.0mm
1 x Super-fine sanding discs grain 000
1 x Three jaw chuck for the lathe DB 250
1 x Diamond Twist Drills
1 x Professional polishing sponge
1 x Sanding pads for OZI 220/E grit 150
2 x HSS cutting blade for OZI
1 x Collet Set for accurate use on round components
1 x Quick-action tool holder kit SWH AA
1 x Sanding Discs
1 x Morse taper MT2 - B16
1 x Grinding mop cylinder grit 120
2 x Sanding pads for OZI 220/E grit 240
1 x Replacement cutting disc for MICRO cutter MIC
1 x Band knife of hardened spring band steel (without teeth)
2 x Treated muslin polishing wheel, stiff (100 x 15mm)
1 x TU 1503V
1 x quantum revolving center CM2
1 x Pensander PS 13
1 x End mill for aluminium 4mm
2 x Tungsten carbide cutters set
1 x MICRO Miller FF 230
1 x Nylon Fleece Brushes
1 x Grinding mop cylinder grit 240
1 x Grinding mop cylinder grit 120
1 x Three-jaw steel drill chuck
1 x 14-piece parallel supports set
1 x Steady rest for D250X550
1 x Micro Compound Table KT 70
1 x Hot wire cutter THERMOCUT 650
1 x Coarse-toothed blades (No. 5: 17 teeth per 25mm)
1 x Silicon-Carbide.
1 x Radius Cutting Attachment, complete with pointed tool
1 x Crosscut 'Super-Cut' blade
1 x MICROMOT Mains Adapter NG 2/S
1 x Coarse-toothed blades (No. 5: 36 teeth per 25mm)
1 x Cutting disc, with reinforcement
1 x Coarse-toothed blades (No. 3: 34 teeth per 25mm)
1 x Diamond Cutting Discs
1 x Independent four jaw chuck for the DB 250
1 x Bandsaw blade of bimetal for MBS 240/E
1 x Five piece HSS chisel set
1 x Super-fine sanding discs grain 400
1 x HSS 1,065 x 6 x 0.6mm Dentado variável 10-14 TPI
1 x Special Fused Alumina (Hardness N).
1 x End milling cutter kit HSS 20 pcs
€3,692.47
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
We Accept
What's New?
Grinding mop cylinder grit 120
Grinding mop cylinder grit 120
€8.33
Languages
Portugues English

Copyright © 2024 Oficina-digital.com
De acordo com a Lei nº 144/2015 informamos que em caso de litígio, o foro competente será o Centro de Arbitragem de Conflitos de Consumo de Lisboa.
Livro de Reclamações Online